‘VASHUDHA’
62 B, BRAUNFELD ROW,
KOLKATA-700 027
MON - SAT: 10 am - 6 pm
SUNDAY: Closed
‘VASHUDHA’
62 B, BRAUNFELD ROW,
KOLKATA-700 027
MON - SAT: 10 am - 6 pm
SUNDAY: Closed
CONCRETE & MORTAR ADMIXTURE
Hind Plast AEA
AIR ENTRAINING AGENT FOR CONCRETE & MORTAR
DESCRIPTION :
Hind Plast AEA is a slight alkaline solution, miscible with water, and having specific gravity of 1.01. It is an air entraining agent based on selected resin, conforming to ASTM-C 260-66T & IS: 9103:1999 (Reaffirmed 2004) Edition 2.2 (2007-08).
USES :
Hind Plast AEA is recommended to be used for well compacted durable concrete, resistant to extreme thermal variation and frost action is required. The area for use include roads, runways paving’s, hardstands, dams, canal lining, open storage areas etc. Hind Plast AEA of great benefit in light weight concrete, where it improves workability and reduces tendency to bleed. It is useful in reducing the density of light weight concrete blocks, so that blocks meet thermal insulation requirements. Hind Plast AEA gives increased durability to dense concrete and because of the entrained air, a reduction in material costs is achieved.
ADVANTAGES :
Hind Plast AEA functions on the interface of the sand and water to produce stable microscopic air bubbles uniformly distributed throughout the concrete. These bubbles serve to reduce both the amount of water absorbed and damage which arises from the formation of ice crystals in the pores of concrete. Apart from its usefulness in providing a much greater resistance to splaying and cracking in freeze/thaw environments Hind Plast AEA improves the properties of fresh concrete. Thus it gives the concrete better cohesion and workability, reduced segregation and bleeding which often occur when utilizing low quality aggregates and harsh mixes.
APPLICATION :
Hind Plast AEA is supplied, ready to use and should be added to mix with gauging water.
RATE OF ADDITION :
The dosage rate of Hind Plast AEA varies from 0.03% to 0.15% by weight of cement (BWOC) to produce concrete with entrained air of 5% ± 1.5 %. The exact dosage should be determined by site trials and by using air meter to determine the air content as per requirement in trial mixes. Generally higher the dosage rate, the greater the air entrainment, but mixes with low workability require a higher dosage rate to give a specified air content. In addition, concrete having low cement but high sand content will require less Hind Plast-AEA than Cement-rich, low sand concrete. Other factors to be taken into account include aggregate grading, strength requirements, yield and temperature. If PFA or Microsilica is used in the concrete the dosage may increase to obtain the required air content. Frequent air meter test to be done correctly and dosage rate adjusted to control the air content which is normally in the range of 3%-5% without affecting the strength of concrete.
PROPERTIES :
- It does not contain Calcium Chloride or any other Chemicals, harmful for durable concrete.
- Is Compatible with all type of Portland cement.
- Chemicals used for formulation of Hind Plast AEA present no fire or health hazards.
- Hind Plast AEA is formulated from selected raw materials and is manufactured under control conditions to give a consistent product.
SHELF LIFE :
12 months from the date of manufacture in unopened condition. Should be stored in a cool and dry place away from direct sunlight, at temperature ranging between 20 C (Min.) and 500 C (Max.)
PACKING :
200 Kg. HDPE Container.
HANDLING PRECAUTION :
Hind Plast AEA is non-toxic and ingestion is to be avoided. Any splashes to the skin must be washed with water. If contact with eyes occurs, wash well immediately with water and seek medical advice.
Hind Plast Super Anti Freeze
ANTI FREEZE ADMIXTURE FOR COLD WEATHER CONCRETING
DESCRIPTION
Hind Plast Super(TM) Anti Freeze is a liquid admixture based on aqueous solution of inorganic salts for producing high quality concrete at low temperatures especially in cold weather conditions.
USES
Hind Plast Super(TM) Anti Freeze is used under cold weather conditions such as, when slight frosting takes place during day time, if frosting is expected overnight, Cold waves periods is expected and if work gets stopped under general normal conditions.
ADVANTAGES
- It improves workability without addition of excess water.
- Highly frost resistance.
- Water reduction without losing workability and improvement in concrete Compressive Strength.
- Chloride free and protects reinforcement from corrosion.
- Very effective for cold weather concreting as it functions as an Anti Frost/Freeze Agent.
APPLICATION
The recommended dosage is 1% by weight of Cement/binder. Hind Plast Super(TM) Anti Freeze admixture is to be added directly with part gauging water prior to its addition to the wet aggregate cement mix. It is always advisable to carry out site trial mixes to establish the exact dosage as per site requirement.
PROPERTIES
| Aspect | Yellow/Straw to Clear Liquid |
| Specific Gravity | 1.20 ± 0.05 at 27º C |
| pH | > 6 |
| Chloride Content | Nil as per BS: 5075 |
Precautions : While concreting is done in cold weather conditions the below mentioned points should be given attention.
- Formwork used to be free from water, snow or ice. Formwork should be designed and should function as a thermal insulator. If required it should be pre- heated to minimum 0º C.
- Concrete temperature to be maintained at minimum 5º C.
- Hind Plast Super(TM) Anti Freeze if gets frozen, the drum should be thawed gradually in heating environment (No direct heating against flame). The properties of the admixture remain unaffected after it gets completely thawed.
- The concrete is to be protected from loss of moisture and heat by providing covering and insulation.
SHELF LIFE
12 months from the date of manufacture in unopened condition. Should be stored in a cool dry place at temperatures ranging between – 50 C and + 400 C. It should be protected from direct sunlight and frost.
PACKING
20 Kg. or as required.
HANDLING PRECAUTION
Hind Plast Super(TM) Anti Freeze is non-toxic and ingestion is to be avoided. Any splashes to the skin must be washed with water. If contact with eyes occurs, wash well immediately with water and seek medical advice.
Hind Plast AEP
USES :
Hind Plast AEP is used to produce easily workable and durable concrete for roads, runways and parking areas, dams, and mass concrete structures and for lining concrete.
ADVANTAGES :
Increased frost resistance.
- 1. Resistant to de-icing salts.
- 2. Produces flowable concrete.
- 3. Improved workability and durability.
- 4. Increased cohesion reducing the risk of segregation.
- 5. Reduced water content without loss of workability.
- 6. Unaffected setting time even when overdosed.
- 7. Helps to absorb and dissipate heat of hydration in mass concreting.
APPLICATION :
The recommended dosage for Hind Plast AEP ranges from 0.05 to 0.15 % by weight of cement. It is advisable to carry out trial mixes to establish the exact dosage rate required. It is compatible with all types of cement.
PROPERTIES :
| Aspect | Dark Brown liquid |
| Specific gravity | 1.02 0.02 at 27 ° C |
| Chloride content | 0.1 % (Maximum) |
| pH | > 6 |
SHELF LIFE :
12 months from the date of manufacture in unopened condition. Should be stored in a cool and dry place away from direct sunlight, at temperature ranging between 20 C (Min.) and 500 C (Max.)
PACKING :
200 Kg. HDPE Containers or as required.
HANDLING PRECAUTION :
Hind Plast AEP is non-toxic but ingestion is to be avoided. Any splashes to the skin must be washed with water. If contact with eyes occurs, wash well immediately with water and seek medical advice.
Hind Plast IWA
Waterproofing Compound for Concrete
USES :
For producing good cohesive concrete or mortar with adequate work ability less porosity and convenience of placement, without addition of extra water. Very suitable for the precast concrete/ mortar products, as it gives fair-faced concrete/ mortar with improved ultimate strength.
ADVANTAGES :
- Improves work ability without addition of extra water.
- Permeability of concrete/ mortar is greatly improved.
- Does not affect setting times.
- Reduces shrinkage, creep and porosity.
- Provides fair- faced concrete/ mortar.
- No attack on rebar, as it is chloride free.
- Concrete/ mortar flow improves, thus suitable for congested reinforcements.
APPLICATION :
The dosage of Hind Plast IWA is 0.2% by weight of cement i.e. 100 gms. Per 50 Kg bag of cement, however more accurate dosage can be obtained by laboratory and site trials by mix designing as per appropriate requirements.
PROPERTIES :
| Aspect | Dark Brown Liquid |
| Specific Gravity | 1.19 0.02 at 27 º C |
| pH | > 6 |
| Chloride | 0.25 % (Max) |
| Permeability to water as per IS:2645-2003 | Much below the limits of the standard |
| Compatibility | With all cements and quick setting compounds. |
SHELF LIFE :
18 months from the date of manufacture in unopened condition. Should be stored in a cool dry place away from direct sunlight, at temperature ranging between 20 C (Min.) and 500 C (Max.)
PACKING :
100gms, 500 gms, 1, 2, 5, 20, 120, 250 kg in HDPE container.
HANDLING PRECAUTION :
Hind Plast IWA is non-toxic and ingestion is to be avoided. Any splashes to the skin must be washed with water. In extreme cold weather, if sedimentation occurs, the sealed drums should be rolled over on the ground for mixing. If contact with eyes occurs, wash well immediately with water and seek medical advice.
Hind Plast N
NORMAL PLASTICIZER CUM WATER REDUCING CONCRETE ADMIXTURE.
DESCRIPTION
Hind Plast N is a Ligno Sulphonate based normal plasticizer cum water reducer conforming to IS: 9103: 1999,
ASTM C 494 Type A & IS: 2645.
USES
Hind Plast N is recommended for use in concrete floor slabs, foundation, column, beams, & pavement.
ADVANTAGES
Hind Plast N is a low cost water reducer, which can be used to get one or a combination of benefits:
- As a water reducer: Reduction in W/C ratio increases strength but reduces workability,
- Hind Plast N maintains the workability and reduces permeability.
- As a workability aid increased workability can be achieved by using Hind Plast N for a given water cement ratio which will increase the flow characteristic of the concrete leading to easy placement, compaction and finishing.
- Reduction of cement content: Hind Plast N can be used to reduce cement content to the extent of 8 to10% by maintaining the original strength specified and workability and reducing the water content required for the given mix.
APPLICATION
The optimum dose depends on type of mix, grade of concrete, cement content and the desired workability. As a guide Hind Plast N is added with the mixing water prior to its addition to wet aggregate cement mix @ 0.3% to 2.0 % by weight of cement. It is advisable to carry out trial mixes to establish the exact dosage rate required. It is compatible with all types of Portland cement and higher dosage may be used as required, with approval from engineer and consultants.
PROPERTIES
Aspect | Dark brown liquid |
Specific Gravity | 1.17 ± 0.02 at 27 º C |
Chloride content | 0.20 % (max) |
Air Entrainment | < 1% additional air is entrained. |
pH | > 6 |
SHELF LIFE
12 months from the date of manufacture. Should be stored in a cool and dry place away from direct sunlight at temperature ranging between 20 C (Min.) and 500 C (Max.)
PACKING
250 kg in HDPE container
HANDLING PRECAUTION
Hind Plast N is non-toxic and ingestion is to be avoided. Any splashes to the skin must be washed with water. If contact with eyes occurs, wash well immediately with water and seek medical advice.
Hind Plast Super (TM)
SUPERPLASTICISER CUM HIGH RANGE WATER REDUCING ADMIXTURE AND WATERPROOFING COMPOUND FOR CONCRETE.
DESCRIPTION :
Hind Plast Super(TM) is a High range water reducer cum slump retainer, plasticizer cum water proofing admixture specially suitable for concreting for all climates, bearing BIS Certification Mark IS 9103:1999 (Reaffirmed 2004) Edition 2.2 (2007-08) and also conforms to IS 2645 : 2003 and ASTM C 494 Type G.
USES :
Hind Plast Super(TM) is recommended for use in floor slabs, foundation and slender components with packed reinforcement, columns, beams and shotcrete.
ADVANTAGES :
- Improves very high workability to concrete mixes without addition of extra water.
- Improves the retention of high workability with time without excessive retardation of set.
- Reduces permeability.
- Produces flowable concrete.
- Extends the setting.
- Water reduction up to 20% . Higher percentage of water reduction can be achieved depending on Mix Design.
- Significant increase in ultimate strength.
- No shrinkage effect.
APPLICATION :
Use Hind Plast Super(TM) @ 0.2 to 2% by weight of cement. It is advisable to carry out trial mixes to establish the exact dosage rate required. It is compatible with all types of cement.
PROPERTIES :
| Aspect | Dark Brown liquid |
| Specific gravity | Ranges from 1.05 to 1.25 at 27º C |
| Chloride content | 0.2 % (Max) |
| pH | > 6 |
SHELF LIFE :
18 months from the date of manufacture. Should be stored in a cool and dry place away from direct sunlight at temperature ranging between 20 C (Min.) and 500 C (Max.)
PACKING :
225 & 250 Kg. in HDPE container or as required.
HANDLING PRECAUTION:
Hind Plast Super(TM) is non-toxic and ingestion is to be avoided. Any splashes to the skin must be washed with water. If contact with eyes occurs, wash well immediately with water and seek medical advice.
Hind Plast Super (TM) SR 55
SET RETARDING CUM WATER-REDUCING ADMIXTURE FOR CONCRETE
DESCRIPTION
Hind Plast Super (TM) SR 55 is a very effective retarding and supplementary admixture, after getting dispersed in concrete mix, deflocculates the cement particles and delays the hydration process resulting retardation of the initial and final setting time. It is used to enhance the workability without addition of excess water and due to its high water reducing properties allows reduction in free water content of concrete mixes. It conforms to IS : 9103: 1999, ASTM C 494 , Type B & D and EN 934-2 :T8 & T10 .
USES
Hind Plast Super (TM) SR 55 is used for self compacting concrete with retarding properties in the concrete mix in hot weather conditions. It gives extended workability retention with high strength at low W/C ratio, concrete mixes. Can also be used for slip form concrete and white cement concrete. It is extremely beneficial in hot weather concreting where control on the initial and final setting time plays an important and vital role.
ADVANTAGES
- Allows reduction in free water.
- High water reduction enables high ultimate strength.
- Reduces permeability of concrete due to increase of density and makes the concrete durable.
- Very effective for high cement content concrete mixes with low Water Cement ratio making concrete more workable without compromising with loss in strength, density and durability.
- Controlled extension of initial set is achieved.
- Due to its retarding properties, continuous concrete pouring can be done, reducing the possibility of formation of construction joints.
DOSAGE
A trial should be conducted against control concrete to fix the exact dose to achieve the desired workability, within the given parameters of the mix design. Varying doses between 100ml to 500 ml per 100 kg of cementitious material is recommended. Overdosing of Hind Plast Super (TM) SR 55 may result to extended initial and final setting, bleeding/segregation of mix. A slight percentage of overdosing will not adversely affect the ultimate strength of concrete and higher strength can be achieved than normal concrete if compacted properly and cured. Due allowance is to be made for the fluid concrete pressure on formwork and stripping time should be monitored strictly. For free technical consultancy, suggestions on mix designs, kindly call our Technical Services Division.
APPLICATION
Hind Plast Super (TM) SR 55 is to be added to wet concrete after 70-80% of the mixing water is added. At no time it is recommended that it should be added to dry aggregate and cement. Hind Plast Super (TM) SR 55 is compatible with almost all admixtures used for production of quality concrete such as normal, mid-range and high-range water-reducing admixtures, air entertainers, accelerators, retarders, extended set-control admixtures, corrosion inhibitors, and shrinkage reducers. It is also compatible with slag and pozzolans such as fly ash and silica fume.
CORROSIVITY – NON CORROSIVE
Hind Plast Super (TM) SR 55 is a non-corrosive admixture. It will not initiate nor cause corrosion to embedded reinforcements in concrete, pre-stressed concrete or concrete laid on galvanized steel floor and roof. It do not contain calcium chloride or any calcium chloride based ingredients. In all concrete application, Hind Plast Super (TM) SR 55 admixture conform to the most stringent or minimum chloride ion limits followed by the construction industry standards and practices in regards to corrosion prevention.
Rate of hardening
The hardening rate of concrete is dependent on the temperature of the concrete mix and ambient temperature (sources being earth, reinforcement, air, etc.) At high temperatures the setting of concrete is faster and this may cause problems for placing of concrete and finishing. One of the main function of Hind Plast Super (TM) SR 55 is to delay the setting time of concrete. At a normal range of dose the working and setting time of concrete containing OPC is extended approximately from 1 hour to 6 hours in comparison to Plain concrete mix which is also dependent on the materials used and temperature prevailing at site. Trial mixes is recommended, with materials and the prevailing conditions at site to fix the exact dose of admixture required.
PROPERTIES
| Aspect | Transparent/Pale Straw Colour Liquid |
| Specific Gravity | Ranges from 1.10 to 1.15 at 27° C |
| pH | > 6 |
| Chloride Cont | 0. 2% (max) |
SHELF LIFE
Best before 12 months from the date of manufacture in unopened condition. Should be stored in a cool and dry place away from direct sunlight at temperature ranging between 20 C (Min.) and 500 C (Max.)
PACKING
225 Kg. in HDPE Container or as required.
HANDLING PRECAUTION
Hind Plast Super (TM) SR 55 is non-toxic and ingestion is to be avoided. Any splashes to the skin must be washed with water. If contact with eyes occurs, wash well immediately with water and seek medical advice.
Hind Plast Super (TM) A
CHLORIDE FREE ACCELERATING, WATER REDUCING ADMIXTURE FOR CONCRETE
DESCRIPTION
Hind Plast Super(TM) A is light Straw/brown coloured liquid, totally free from chloride.
USES
To accelerate the setting time and early strength gain of cement concrete and mortar mixes without introduction of chloride ion (which is harmful for reinforcement causing corrosion/ rusting). Its water reducing character can be gainfully utilized for both early as well as ultimate strength. Hind Plast Super(TM) A conforms to IS: 9103:1999 (Reaffirmed 2004) Edition 2.2 (2007-08), ASTM C 494 Type C and BS 5075 Part I and II
ADVANTAGES
- Chloride free, safe in prestressed and reinforcing concrete.
- Generates very high early strength in concrete.
- Its plasticizing action increases workability and/or increased strength.
- Particularly effective in low temperature concreting.
APPLICATION
The recommended dosage for standard mix concrete ranges from 0.2 to 1% by weight of cement in tropical temperature, higher than 25°C. For low temperature concreting (5°C to 25°C) the dosage ranges from 0.7 to 2% by weight of cement. Admixture is to be added directly into the mixer. For very high early strength, steam curing/ and increase of dosage is recommended, depending on site requirements. The optimum dosage is best determined by site trials with actual concrete mix.
PROPERTIES
| Aspect | Light Straw/Pale brown Liquid |
| Specific Gravity | 1.20 ± 0.04 at 27º C |
| pH | > 6 |
| Chloride Content | Nil as per BS: 5075 |
| Compatibility | All types cements. Not suitable for high Alumina cement (cement fondue) |
| Long term effect | Accelerated corrosion testing shows that the rebars remain protected even at five times the normal dose level of Hind Plast Super(TM) A |
| Typical Performance of Hind Plast Super(TM) A | |||||||
| Grade of concrete M 35 W/C 0.38 | |||||||
Cement Content Kg/m 3 | Dosage of Admixture Kg/ 100 kg. | Initial Set. hrs. | Final Set. hrs. | Curing temperature 0 C | Compressive Strength -3 days N/mm 2 | Compressive strength 7 days N/mm 2 | Compressive strength 28 days N/mm 2 |
400 400 | Nil (Control) 2.5 (Hind Plast Super A Nil 2.0 | 14 11 9 6 | 19 17 16 14 | 5 – 10 20 – 25 | 17.5 22.0 24.0 30.0 | 26.5 28.0 32.0 34.0 | 36 39.5 40 44 |
SHELF LIFE
Best before 12 months from the date of manufacture. Should be stored in a cool and dry place away from direct sunlight at temperature ranging between 20 C (Min.) and 500 C (Max.)
PACKING
250 kg. in HDPE Container or as required.
HANDLING PRECAUTION
Hind Plast Super(TM) A is non-toxic and ingestion is to be avoided. Any splashes to the skin must be washed with water. If contact with eyes occurs, wash well immediately with water and seek medical advice.
Hind Plast Super (TM) HR
SUPERPLASTICISER CUM HIGH RANGE WATER & HEAT REDUCING ADMIXTURE AND WATERPROOFING COMPOUND FOR CONCRETE.
DESCRIPTION
Hind Plast Super(TM) HR is a Modified Polycarboxylic based, High range water and heat reducer cum slump retainer, superplasticizer cum water proofing admixture specially suitable for concreting for all climates, conforming to IS 9103:1999 (Reaffirmed 2004) Edition 2.2 (2007-08), IS 2645 : 2003 and ASTM C 494 Type F.
USES :
Hind Plast Super(TM) HR is recommended for use in floor slabs, foundation and slender components with packed reinforcement, column, beams, shotcrete and ceiling and is very effectively used for reducing the concrete temperature upto 100 C over control concrete.
ADVANTAGES :
- Improves very high workability to concrete mixes without addition of extra water.
- Improves the retention of high workability with time without excessive retardation of set.
- Reduces the temperature of concrete upto 100 degree C
- Permeability of Concrete/Mortar is greatly improved.
- Produces flowable concrete.
- Extends the setting.
- Water reduction up to 25 %.
- Significant increase in ultimate strength.
- No shrinkage effect.
APPLICATION :
Use Hind Plast Super(TM) HR, 0.2 to 2% by weight of cement. It is advisable to carry out trial mixes to establish the exact dosage rate required. It is compatible with all types of Portland cement.
PROPERTIES :
| Aspect | Light Brown Liquid |
| Specific gravity | Ranges from 1.05 to 1.25 at 27º C |
| Chloride content | 0.2 % (Max) |
| pH | > 6 |
SHELF LIFE :
Best before 12 months from the date of manufacture. Should be stored in a cool and dry place away from direct sunlight at temperature ranging between 20 C (Min.) and 500 C (Max.)
PACKING :
225 kg. in HDPE container or as required.
HANDLING PRECAUTION :
Hind Plast Super(TM) HR is non-toxic and ingestion is to be avoided. Any splashes to the skin must be washed with water. If contact with eyes occurs, wash well immediately with water and seek medical advice.
Hind Plast Super (TM) MMF
Hind Plast Super(TM) MMF – Melamine based Superplasticizer
USES :
Hind Plast Super(TM) MMF can be used to produce an extremely workable FLOWABLE CONCRETE without loss of strength or to enable large water reduction to be made for the same workability resulting in dense concrete with higher ultimate strength. This product is quite helpful in producing pumpable concrete, precast concrete, pre-stressed concrete, industrial /commercial flooring with floor toppings and in areas where early shutter stripping are required.
TABLE-1 Test Results for early Shutter Stripping Usage :
Hind Plast Super(TM) MMF :
| Sl.No. | Test | Dosage in Ltr/50Kg of Cement | W/C Ratio | Cement content in Kg/m3 | Slump in mm. | Compressive strength in Kg/cm2 | |||
| 1day 3days 7days 28days | |||||||||
| 1. | Control Mix | Nil | 0.55 | 400 | 100 | 82 | 140 | 243 | 342 |
| 2. | With Hind Plast Super(TM) MMF | 0.3 | 0.50 | 400 | 115 | 116 | 245 | 340 | 405 |
NOTE: The above results are guidelines and as such are suggested in good faith. It is based on test carried out by us in our laboratory using cement, aggregates available locally. Type of cement aggregates from other sources can produce different results. Therefore, it is recommended that site trials are essential to determine optimum suitability for proposed application & dosages.
ADVANTAGES :
Substantial improvement in workability and flow properties without increased water, produces self levelling concrete which can be poured into place around densely located reinforcement and requires little (or no) vibration to achieve optimum compaction. The bond strength of concrete to reinforcement steel is considerably increased.
- 1. The internal friction and thixotropy of the mix is reduced to a minimum without the risk of segregation, thus making concrete pumping more efficient.
- 2. Very significant reduction in water minimizes shrinkage cracking thereby producing durable, impervious concrete with a good surface finish. It is suitable for use in all types of concrete above and below ground subjected to water pressure and aggressive atmospheric conditions. Reduction in concrete permeability, protects against water migration and corrosion of reinforcements.
- 3. For a given concrete mix, keeping the cement consumption and workability constant by huge reduction in the amount of mixing water, substantial increase in strength can be achieved. Alternatively, for the same concrete mix, by keeping the workability and strength constant, a definite cement economy ranging from 15 to 25% can be obtained. Obvious advantages for precast concrete production.
APPLICATION :
Hind Plast Super(TM) MMF is supplied ready for use. For effective dispersion in the mix, measured quantity of Hind Plast Super(TM) MMF should be added into the mix with gauging water. It should not be added to the dry cement.
PROPERTIES :
| Aspect | Dark Brown liquid |
| Chloride content | 0.2 % (Max) |
| Specific gravity | 1.20 0.02 at 270 C |
| pH | > 6 |
| Compatibility | Can be used with all types cements including sulphate resistant cement. |
SHELF LIFE :
Best before 12 months from the date of manufacture. Should be stored in a cool and dry place away from direct sunlight at temperature ranging between 20 C (Min.) and 500 C (Max.)
PACKING :
250 Kg. in HDPE container or as required.
HANDLING PRECAUTION :
Hind Plast Super(TM) MMF is non-toxic and ingestion is to be avoided. Any splashes to the skin must be washed with water. If contact with eyes occurs, wash well immediately with water and seek medical advice.
Hind Plast Super (TM) P
Naphthalene( powder) based Superplasticizer Admixture – Hind Plast Super
USES :
Hind Plast Super(TM) P, is recommended for use in floor slabs, foundation and slender components with packed reinforcement, columns, beams and Shotcreting (Dry).
ADVANTAGES :
- 1. Improves workability to concrete mixes without addition of extra water.
- 2. Reduces permeability.
- 3. Water reduction up to 12%.
- 4. Significant increase in ultimate strength.
- 5. No shrinkage effect.
APPLICATION :
Use Hind Plast Super(TM) P @ 0.2 to 1.0 % by weight of cement. It is advisable to carry out trial mixes to establish the exact dosage rate required. It is compatible with all types of cement.
PROPERTIES :
| Aspect | Dark Brown Powder |
| Bulk Density | 655 5 gm/ltr. |
| pH (10% Soln.) | 9.50 0.05 |
| Chloride content | 0.2 % (Max) |
SHELF LIFE :
Best before 12 months from the date of manufacture. Should be stored in a cool and dry place away from direct sunlight at temperature ranging between 20 C (Min.) and 500 C (Max.)
PACKING :
25 Kg. in HDPE Bag.
HANDLING PRECAUTION :
Hind Plast Super(TM) P is non-toxic and ingestion is to be avoided. If contact with eyes occurs, wash well immediately with water and seek medical advice.
Hind Plast Super (TM) PQC
DESCRIPTION
Hind Plast Super(TM) PQC is a Polymer based, high range water reducer cum slump retainer plasticizer specially suitable for concreting in hot climate conforming to IS: 9103 : 1999 (Reaffirmed 2004) Edition 2.2 (2007-08) and ASTM C494.
USES
Hind Plast Super(TM) PQC is recommended for use in floor slabs, foundation and slender components with packed reinforcement and pavement quality concrete for Roads, Bridges Decks, Jetty etc.
ADVANTAGES
- Improves very high workability to concrete mixes without addition of extra water.
- Improves the retention of high workability with time without excessive retardation of set.
- Reduces permeability.
- Produces flow-able concrete
- Water reduction up to 20%.
- Significant increase in ultimate strength.
- No Shrinkage effects.
APPLICATION
The recommended dosage range is 0.4 to 2% by weight of cement. It is advisable to carry out trial mixes to establish the exact dosage rate required. It is compatible with all types Portland cement. Hind Plast Super(TM) PQC is added to part of the mixing water prior to its addition to wet aggregate cement mix.
PROPERTIES
| Form | Dark Brown liquid. |
| Specific gravity at 270 C | 1.10 to 1.15 |
| Chloride content | 0.2 % (Maximum) |
| Air Entrainment | 1 to 2 % additional air is entrained. |
| pH | > 6 |
SHELF LIFE
Best before 12 months from the date of manufacture. Should be stored in a cool and dry place away from direct sunlight at temperature ranging between 20 C (Min.) and 500 C (Max.)
PACKING
250 Kg. HDPE Container or as required.
HANDLING PRECAUTION
Hind Plast Super(TM) PQC is non-toxic and ingestion is to be avoided. Any splashes to the skin must be washed with water. If contact with eyes occurs, wash well immediately with water and seek medical advice.
Hind Plast Super (TM) WRA
SUPER PLASTICISER CUM HIGH RANGE WATER REDUCING ADMIXTURE FOR CONCRETE
DESCRIPTION
Hind Plast Super(TM) WRA is a Sulphonated Naphthalene Formaldehyde based, High range water reducer conforming to IS 9103:1999 (Reaffirmed 2004) Edition 2.2 (2007-08) , ASTM C 494. Type F and IS: 2645 : 2003.
USES
Hind Plast Super(TM) WRA is recommended for use in floor slabs, foundation and slender components with packed reinforcement, columns, beams and pavement quality concrete.
ADVANTAGES
- Improves very high workability to concrete mixes without addition of extra water.
- Permeability of Concrete/ Mortar is greatly improved.
- Produces flowable concrete.
- Water reduction up to 15 %.
- Significant increase in ultimate strength.
- No shrinkage effects.
APPLICATION
The recommended dosage is 0.5 to 2 % by weight of cement. It is advisable to carry out trial mixes to establish the exact dosage rate required. It is compatible with all types of Portland cement. Hind Plast Super(TM) WRA is added to gauging water prior to its addition to wet aggregate cement mix.
PROPERTIES
| Aspect | Dark Brown Liquid |
| Specific gravity | Ranges from 1.05 to 1.22 at 27 ° C |
| Chloride content | 0.2 % (Max) |
| pH | > 6 |
SHELF LIFE
Best before 12 months from the date of manufacture. Should be stored in a cool and dry place away from direct sunlight at temperature ranging between 20 C (Min.) and 500 C (Max.)
PACKING
250 kg. in HDPE Container or as required.
HANDLING PRECAUTION
Hind Plast Super(TM) WRA is non-toxic but ingestion is to be avoided. Any splashes to the skin must be washed with water. If contact with eyes occurs, wash well immediately with water and seek medical advice.
Hind Plast Super (TM) 160
HIGH RANGE WATER REDUCING SUPER PLASTICISER
DESCRIPTION
Hind Plast Super(TM) 160 is a high range water reducing superplasticizer. Its high range water reducing cum slump retaining and waterproofing properties makes its especially suitable for concreting in all climatic conditions. It conforms to IS 9103:1999 (Reaffirmed 2004) Edition 2.2 (2007-08) and ASTM C 494, Type F and IS 2645:2003.
USES
Hind Plast Super(TM)160 is recommended for use in precast concrete, piling, floor slabs, foundation and slender components with packed reinforcement, columns, beams, ceiling and cast -in-situ works.
ADVANTAGES
- Improves very high workability to concrete mixes without addition of extra water.
- Improves very high workability to concrete using crusher sand.
- Improves the retention of high workability with time without excessive retardation of set.
- Reduces permeability.
- Produces flowable concrete.
- Extends initial setting time without affecting the final setting time.
- Water reduction up to 30%. Higher percentage of water reduction can be achieved depending on Mix Design.
- Significant increase in ultimate strength.
- No shrinkage effect.
- It is applicable in severe atmospheric and saline conditions.
APPLICATION
Use Hind Plast Super(TM) 160 @ 0.2 to 2% by weight of cement. It is advisable to carry out trial mixes to establish the exact dosage rate required. It is compatible with all types of cement.
PROPERTIES
| Aspect | Light Orange Liquid |
| Specific gravity | Ranges from 1.02 to 1.26 at 27º C |
| Chloride content | < 0.1 % ( Considered to be Nil) |
| pH | > 6 |
SHELF LIFE
Best before 12 months from the date of manufacture. Should be stored in a cool and dry place away from direct sunlight at temperature ranging between 20 C (Min.) and 500 C (Max.)
PACKING
225 Kg. HDPE Containers or as required.
HANDLING PRECAUTION
Hind Plast Super(TM)160 is non-toxic and ingestion is to be avoided. Any splashes to the skin must be washed with water. If contact with eyes occurs, wash well immediately with water and seek medical advice. Overdosing of the material may cause delay in setting of the concrete.
Hind Plast Super (TM) 160 (P)
HIGH RANGE WATER REDUCING SUPER PLASTICISER, BASED ON POLYCARBOXYLIC ETHER
DESCRIPTION
Hind Plast Super(TM) 160 (P) is a third generation Polycarboxylic ether based superplasticizer. Its high range water reducing cum slump retaining and waterproofing properties makes its especially suitable for concreting in all climatic conditions. It conforms to IS 9103:1999 (Reaffirmed 2004) Edition 2.2 (2007-08) and ASTM C 494, Type F and IS 2645:2003.
USES
Hind Plast Super(TM) 160 (P) is recommended for use in precast concrete, piling, floor slabs, foundation and slender components with packed reinforcement, columns, beams, ceiling and cast -in-situ works.
ADVANTAGES
- Improves very high workability to concrete mixes without addition of extra water.
- Improves very high workability to concrete using crusher sand.
- Improves the retention of high workability with time without excessive retardation of set.
- Reduces permeability.
- Produces flowable concrete.
- Extends initial setting time without affecting the final setting time.
- Water reduction up to 30%. Higher percentage of water reduction can be achieved depending on Mix Design.
- Significant increase in ultimate strength.
- No shrinkage effects.
- It is applicable in severe atmospheric and saline conditions.
APPLICATION
Use Hind Plast Super(TM) 160 (P) @ 0.2 to 2% by weight of cement. It is advisable to carry out trial mixes to establish the exact dosage rate required. It is compatible with all types of cement.
PROPERTIES
| Aspect | Light Orange Liquid |
| Specific gravity | Ranges from 1.02 to 1.08 at 27º C |
| Chloride content | 0.2 % (Max) |
| pH | > 6 |
SHELF LIFE
Best before 12 months from the date of manufacture. Should be stored in a cool and dry place away from direct sunlight at temperature ranging between 20 C (Min.) and 500 C (Max.)
PACKING
225 Kg. HDPE Containers or as required.
HANDLING PRECAUTION
Hind Plast Super(TM) 160 (P) is non-toxic and ingestion is to be avoided. Any splashes to the skin must be washed with water. If contact with eyes occurs, wash well immediately with water and seek medical advice. Overdosing of the material may cause delay in setting of the concrete.
Hind Plast Super(TM) HPC
SUPERPLASTICIZER, HIGH EARLY STRENGTH, HIGH RANGE WATER REDUCING AND INTEGRAL WATERPROOFING ADMIXTURE FOR CONCRETE & PRECAST CONCRETE
DESCRIPTION
Hind Plast Super(TM) HPC is a new generation polycarboxylic ether based admixture conforming to IS 9103: 1999 (Amended 2003), ASTM C 494, Type F & G and IS: 2645:2003
USES
Hind Plast Super(TM)HPC is recommended for use in concrete of all types especially for concrete with high workability, high early and long term strength requirements with zero segregation and low water Cement (binder) ratio.
ADVANTAGES
- Improves workability of concrete mixes with low W/C Ratio.
- To achieve high early strength.
- Permeability of concrete/mortar is greatly improved.
- Makes Concrete 100% waterproof.
- Curing time gets reduced, resulting to increased production of concrete.
- Especially beneficial for quality precast concrete element.
- Impervious concrete with less shrinkage resulting to early and ultimate Compressive and Flexural strength is achieved in comparison to use of the common traditional superplasticiser.
- Significant increase in ultimate strength.
APPLICATION
The recommended dosage is 0.3 to 1.5% by weight of cement. It is advisable to carry out trial mixes to establish the exact dosage rate required. It is compatible with all types of cement. Hind Plast Super(TM) HPC is to be added to wet concrete after 70-80% of the mixing water is added. At no time it is recommended that it should be added to dry aggregate and cement.
PROPERTIES
| Aspect | Light Brown Liquid |
| Specific Gravity | Ranges from 1.02 to 1.29 + 0.02 at 250 C |
| Chloride content | < 0.1 % ( Considered to be Nil) |
| pH | > 6 |
SHELF LIFE
Best before 12 months from the date of manufacture. Should be stored in a cool and dry place away from direct sunlight at temperature ranging between 20 C (Min.) and 500 C (Max.)
PACKING
225 Kg. HDPE Containers or as required.
HANDLING PRECAUTION
Hind Plast Super(TM) HPC is non-toxic but ingestion is to be avoided. Any splashes to the skin must be washed If contact with eyes occurs, wash well immediately with water and seek medical advice. Overdosing of the material may cause delay in setting of the concrete.
Hind Plast Super(TM) R
Hind Plast Super(TM) R – Retarding Concrete Admixture cum Water reducing Admixture
USES
Hind Plast Super(TM) R is used for high range water reduction in concrete, mortar and shotcrete mixes that enables a user to retain workability without compromising strength.
ADVANTAGES
- An excellent aid for pumping concrete.
- Keeps concrete in plastic state and workable for long time.
- Placement for concrete in areas for congested reinforcement becomes easier.
- High water reduction enables high ultimate strength.
- Achieves high early strength, enabling faster shipping formwork.
- Arrests shrinkage & creep.
- Enables to save cement in concrete.
- Improves compactness, strength and durability of concrete.
APPLICATION & DOSAGE
A trial should be conducted against control concrete to fix the exact dose to achieve the desired workability, within the given parameters of the mix design. Varying doses between 0.3 % to 2.0 % by weight of cement, should bring in the desired results. For free technical consultancy, suggestions on mix designs, kindly call our Technical Services Division.
GUIDELINES
The table below shows laboratory results of the various applications of Hind Plast Super(TM) R to achieve high workability, cement saving, improved strength, etc. to suit specific requirements.
Typical Performance of Hind Plast Super(TM) R
| Grade of Concrete (M35A20) | Cement Content (kg./M3) | W/C (Water to Cement ratio) | Hind Plast Super™-R Dose (%BWOC) | Initial Slump (mm) | (After 1 hour) Slump (mm) | 28 days Strength (N/mm2) | Benefit |
| M-35 | 404 | 0.41 | – | 25 | 0 | 40.28 | Normal concrete |
| M-35 | 403 | 0.41 | 0.5 | 75 | 25 | 46.58 | Cement Saving |
| M-35 | 403 | 0.41 | 0.6 | 85 | 50 | 47.5 | High
Strength |
| M-35 | 426 | 0.41 | 0.5 | 175 | 115 | 46.35 | Very High Workablility,Graeter strength. |
| M-35 | 425 | 0.41 | 0.6 | 190 | 155 | 47.0 | Cohesive Economical Workable Concrete |
Setting Time Testing for Hind Plast Super(TM) R
| Grade of concrete | Hind Plast Super(TM) – R Dose ( % BWOC* ) | Curing temp. | Initial Set
Hrs. | Final Set
Hrs. |
| M-35 | Nil ( Control ) | 270 C 20 C | 8 | 14 |
| M-35 | 0.5 – 0.6 | 270 C 20 C | 9 | 16 |
*BWOC : By weight of cement.
(Results obtained with PPC 53 grade cement at 30° C and 65% Rh)
PROPERTIES
| Aspect | Dark Brown Liquid |
| Specific Gravity | Ranges from 1.05 to 1.22 at 27° C |
| pH | > 6 |
| Chloride Cont | 0.2% (max) |
| Compatibility | With all cements and quicksetting compounds. |
SHELF LIFE
Best before 12 months from the date of manufacture. Should be stored in a cool and dry place away from direct sunlight at temperature ranging between 20 C (Min.) and 500 C (Max.)
PACKING
250 kg. in HDPE Container or as required.
HANDLING PRECAUTION
Hind Plast Super(TM) R is non-toxic and ingestion is to be avoided. Any splashes to the skin must be washed with water. If contact with eyes occurs, wash well immediately with water and seek medical advice.
Hind Plast Super(TM) SCA
SELF COMPACTING HIGH PERFORMANCE SUPER PLASTICIZER BASED ON POLYCARBOXYLIC TECHNOLOGY
DESCRIPTION
Hind Plast Super(TM) SCA is a new generation Superplasticizer for concrete based on Polycarboxylic Ether Polymer with long lateral chains. Hind Plast Super(TM) SCA gets the cement to be dispersed to a greater extent and combines the properties to produce self compacting non-shrinkable concrete with high range water reduction and workability retentions. It is also helpful for the production of high performance concrete with high workability. It conforms to IS: 9103: 1999 (Reaffirmed 2004) Edition 2.2 (2007-08), ASTM C494, Type F & G and IS: 2645: 2003.
USES
Hind Plast Super(TM) SCA is a high performance Superplasticizer which is suitable for concrete where high early and ultimate strengths are required. It has been developed for use in
- Self compacting concrete.
- Ready Mix Concrete.
- Concrete with extreme water reduction with excellent flowability with optimal cohesion.
- Pumped concrete.
- Pre-cast concrete.
- High performance and high strength concrete.
- Concrete requiring long workability and retention.
ADVANTAGES
- Strong self compacting behavior.
- Water reduction up to 40%. Higher percentage of water reduction can be achieved depending on Mix Design.
- Develop early strength.
- Increase flexural strength.
- Reduces permeability.
- Reduced shrinkage and creep.
- Increase durability.
- Reduced rate of carbonation of the concrete.
- Improved adhesion to reinforcing and stressing steel.
APPLICATION
The optimum dosage of Hind Plast Super™ SCA ranges from 0.2 to 1.0% by weight of cement. It is advisable to carry out the trial mixes to establish the exact dosage rate required. Hind Plast Super SCA is compatible with all types of cement. Hind Plast Super TM SCA is added to gauging water prior to its addition to wet aggregate cement mix
PROPERTIES
Aspect | Light Brown liquid. |
Specific Gravity | 1.08 ± 0.02 |
Chloride content | < 0.1 % ( Considered to be Nil) |
pH | > 6 |
SHELF LIFE
12 months from the date of manufacture. Should be stored in a cool and dry place away from direct sunlight at temperature ranging between 20 C (Min.) and 500 C (Max.)
PACKING
225 Kg. HDPE Containers or as required.
HANDLING PRECAUTION
Hind Plast Super(TM) SCA is non-toxic and ingestion is to be avoided. Any splashes to the skin must be washed with water. If contact with eyes occurs, wash well immediately with water and seek medical advice. Overdosing of the material may cause delay in setting of the concrete.
Hind Plast Super(TM) HPC 500
SUPERPLASTICIZER, HIGH EARLY STRENGTH, HIGH RANGE WATER REDUCING ADMIXTURE FOR CONCRETE & PRECAST CONCRETE
DESCRIPTION
Hind Plast Super(TM) HPC 500 is a new generation polycarboxylic ether based admixture conforming to IS 9103: 1999 (Amended 2003), ASTM C 494, Type F and IS: 2645:2003 .
USES
Hind Plast Super(TM)HPC 500 is recommended for use in concrete of all types especially for concrete with high workability, high early and long term strength requirements with zero segregation and low water Cement (binder) ratio.
ADVANTAGES
- Improves workability of concrete mixes with low W/C Ratio.
- Water reduction can be achieved ranging upto 25% depending on thuptoe Mix Design.
- To achieve high early strength.
- Curing time gets reduced, resulting to increased production of concrete.
- Especially beneficial for quality precast concrete element.
- Impervious concrete with less shrinkage resulting to early and ultimate Compressive and Flexural strength is achieved in comparison to use of the common traditional Superplasticiser
- Significant increase in ultimate strength.
- Permeability of Concrete/Mortar is greatly increased.
APPLICATION
The recommended dosage is 0.3 to 1.5% by weight of cement. It is advisable to carry out trial mixes to establish the exact dosage rate required. It is compatible with all types of cement. Hind Plast Super(TM) HPC 500 is to be added to wet concrete after 70-80% of the mixing water is added. At no time it is recommended that it should be added to dry aggregate and cement.
PROPERTIES
| Aspect | Light Brown Liquid |
| Specific Gravity | Ranges from 1.02 to 1.29 + 0.02 at 250 C |
| Chloride content | < 0.2 % |
| pH | > 6 |
SHELF LIFE
Best before 12 months from the date of manufacture. Should be stored in a cool and dry place away from direct sunlight at temperature ranging between 20 C (Min.) and 500 C (Max.)
ght.
PACKING
225 Kg. HDPE Containers or as required.
HANDLING PRECAUTION
Hind Plast Super(TM) HPC 500 is non-toxic but ingestion is to be avoided. Any splashes to the skin must be washed If contact with eyes occurs, wash well immediately with water and seek medical advice. Overdosing of the material may cause delay in setting of the concrete.
Hind Plast Super(TM) SCA 800
SELF COMPACTING HIGH PERFORMANCE WATER REDUCING
SUPER PLASTICIZER BASED ON POLYCARBOXYLIC TECHNOLOGY
DESCRIPTION
Hind Plast Super(TM) SCA-800 is a new generation superplasticizer for concrete based on Polycarboxylic Ether Polymer with long lateral chains. Hind Plast Super(TM) SCA-800 gets the cement to be dispersed to a greater extent and combines the properties to produce self compacting, high flowable, non-shrinkable concrete with water reduction and workability retentions. It conforms to IS: 9103: 1999 (Reaffirmed 2004) Edition 2.2 (2007-08), ASTM C494, Type F & G and IS: 2645:2003.
USES
Hind Plast Super(TM) SCA-800 is a high performance Superplasticizer which is suitable for concrete where high early and ultimate strengths are required. It has been developed for use in
- Self compacting and high flow concrete
- Concrete with extreme water reduction with excellent flow-ability and optimal cohesion.
- Pumped concrete.
- Pre-cast concrete.
- High performance and high strength concrete.
- Concrete requiring long workability and retention.
- Concrete containing pozzolans such as Micro Silica, PFA , GGBS and high volume of Fly Ash.
ADVANTAGES
- Strong self compacting behavior.
- Water reduction up to 40%. Higher percentage of water reduction can be achieved depending on Mix Design.
- Develop early strength.
- Increase flexural strength.
- Reduces permeability.
- Reduced shrinkage and creep.
- Increase durability.
- Reduced rate of carbonation of the concrete.
- Improved adhesion to reinforcing and stressing steel.
APPLICATION
The optimum dosage of Hind Plast Super™ SCA-800 ranges from 0.2 to 1.0% by weight of cementitious materials. It is advisable to carry out the trial mixes to establish the exact dosage rate required. Hind Plast Super SCA-800 is compatible with all types of cement. Hind Plast Super™ SCA-800 should be added to gauging water prior to its addition to wet aggregate cement mix
PROPERTIES
| Aspect | Light Brown liquid. |
| Specific Gravity | 1.08 ± 0.05 at 270 C |
| Chloride content | 0.2 % (Max) |
| pH | > 6 |
SHELF LIFE
Best before 12 months from the date of manufacture. Should be stored in a cool and dry place away from direct sunlight at temperature ranging between 20 C (Min.) and 500 C (Max.)
PACKING
225 Kg. HDPE Containers or as required.
HANDLING PRECAUTION
Hind Plast Super(TM) SCA-800 is non-toxic and ingestion is to be avoided. Any splashes to the skin must be washed with water. If contact with eyes occurs, wash well immediately with water and seek medical advice. Overdosing of the material may cause delay in setting of the concrete.
Hind Plast Super(TM) SCA 1000
SELF COMPACTING HIGH PERFORMANCE SUPER PLASTICIZER BASED ON POLYCARBOXYLIC TECHNOLOGY
DESCRIPTION
Hind Plast Super(TM) SCA-1000 is a new generation Superplasticizer for concrete based on Polycarboxylic Ether Polymer with long lateral chains. Hind Plast Super(TM) SCA-1000 gets the cement to be dispersed to a greater extent and combines the properties to produce self compacting, high flowable, non-shrinkable concrete with high range water reduction and workability retentions. It is also helpful for the production of high performance concrete with high range water reducing properties from M-50 to M-70 Grade with high workability. It conforms to IS: 9103: 1999 (Reaffirmed 2004) Edition 2.2 (2007-08), ASTM C494, Type F & G and IS: 2645:2003.
USES
Hind Plast Super(TM) SCA 1000 is a high performance Superplasticizer which is suitable for concrete where high early and ultimate strengths are required. It has been developed for use in
- 1. Self compacting concrete.
- 2. Concrete with extreme water reduction with excellent flowability with optimal cohesion.
- 3. Pumped concrete.
- 4. Pre-cast concrete.
- 5. High performance and high strength concrete.
- 6. Concrete requiring long workability and retention.
ADVANTAGES
- Strong self compacting behavior.
- Water reduction up to 40%. Higher percentage of water reduction can be achieved depending on Mix Design.
- Develop early strength.
- Increase flexural strength.
- Reduces permeability.
- Reduced shrinkage and creep.
- Increase durability.
- Reduced rate of carbonation of the concrete.
- Improved adhesion to reinforcing and stressing steel.
APPLICATION
The optimum dosage of Hind Plast Super™ SCA 1000 ranges from 0.2 to 1.0% by weight of cement. It is advisable to carry out the trial mixes to establish the exact dosage rate required. Hind Plast Super SCA 1000 is compatible with all types of cement. Hind Plast Super TM SCA is added to gauging water prior to its addition to wet aggregate cement mix
PROPERTIES
| Aspect | Light Brown liquid. |
| Specific Gravity | 1.08 ± 0.02 |
| Chloride content | 0.2 % (Max) |
| pH | > 6 |
SHELF LIFE
Best before 12 months from the date of manufacture. Should be stored in a cool and dry place away from direct sunlight at temperature ranging between 20 C (Min.) and 500 C (Max.)
PACKING
225 Kg. HDPE Containers or as required.
HANDLING PRECAUTION
Hind Plast Super(TM) SCA 1000 is non-toxic and ingestion is to be avoided. Any splashes to the skin must be washed with water. If contact with eyes occurs, wash well immediately with water and seek medical advice. Overdosing of the material may cause delay in setting of the concrete.
Hind Plast VMA
Hind Plast VMA – Powder based Viscosity Modifying Agent
USES
Hind Plast VMA is recommended for self compacting concrete (SCC), high flow-able concrete, pump-able concrete and concrete with high W/C ratios.
ADVANTAGES
- 1. It possess outstanding anti-bleeding & anti-segregation properties.
- 2. On its addition it does not effect the flow properties of concrete.
- 3. Low dosage
- 4. It mixes with concrete rapidly resulting fast action.
- 5. Compatible with all types of admixture.
APPLICATION
Hind Plast VMA should be dissolved to a 1% solution and should be stirred properly before using as a concrete admixture.
PROPERTIES
| Aspect | White coloured powder, granule. |
| Drying Loss (M%) | Ranges from 1.05 to 1.25 at 27º C |
| Chloride content | 14.0 (Max) |
| pH | 6.0 to 9.0 |
SHELF LIFE
Best before 12 months from the date of manufacture. Should be stored in a cool and dry place away from direct sunlight at temperature ranging between 20 C (Min.) and 500 C (Max.)
PACKING
25 Kg. in HDPE Bag or as required.
HANDLING PRECAUTION
Hind Plast VMA is non-toxic and ingestion is to be avoided. Any contact with the skin must be washed with water. If contact with eyes occurs, wash well immediately with water and seek medical advice.
Hind Plast VMA (L)
Hind Plast VMA (L) – Viscosity Modifying Admixtures for self compacting concrete
USES
Hind Plast VMA (L) is recommended for self compacting concrete (SCC), high flow-able concrete, pump-able concrete and concrete with high W/C ratios.
ADVANTAGES
- 1. It possess outstanding anti-bleeding & anti-segregation properties.
- 2. On its addition it does not effect the flow properties of concrete.
- 3. Low dosage
- 4. It mixes with concrete rapidly resulting fast action.
- 5. Compatible with all types of admixture.
APPLICATION
Hind Plast VMA (L) is to be added to concrete after all ingredients have been batched and thoroughly mixed either it is in the Batching Plant, Laboratory trials or at jobsite. The placement of concrete can be done using the conventional method or by concrete pump. Placement of concrete produced with Hind Plast VMA (L) should be done continuously without any interruption. Hind Plast VMA (L) can also be dispensed during transit of freshly prepared concrete in Transit Mixer and mixing to be carried on for 5 minutes after its addition. The addition of Hind Plast VMA (L) is to be increased proportionately as the water content increases and reduced when the water content is lower. It is always advised to carry out trial mixes to ascertain the exact dosage to achieve the desired requirements.
PROPERTIES
| Aspect | Opaque Liquid |
| Specific Gravity | 1.02 0.02 |
| Chloride content | Nil |
| pH | 6.0 to 9.0 |
DOSAGE
The recommended dosage suggested ranges from 200 gms to 800 gms by weight of cementitious material.
SHELF LIFE
Best before 12 months from the date of manufacture. Should be stored in a cool and dry place away from direct sunlight at temperature ranging between 20 C (Min.) and 500 C (Max.)
PACKING
200 Kg. Container or as required.
HANDLING PRECAUTION
Hind Plast VMA (L) is non-toxic and ingestion is to be avoided. Any contact with the skin must be washed with water. If contact with eyes occurs, wash well immediately with water and seek medical advice.
Hind Pump Aid
PUMPING ADMIXTURE FOR CONCRETE
DESCRIPTION
Hind Pump Aid is an unique admixture formulated from Polymer solution to improve the pump-ability of concrete mixes and it also protects concrete pumps and pipeline from excessive wear and damage. It is a viscosity controlling agent which allows the concrete to pass through the pipeline without any friction.
USES
Hind Pump Aid is used for concrete mixes with low cement content variable fines, poor particle size distribution and consequently low water retention capacity which makes the mix segregate when it is pumped thus creating a very high pump pressure. Aggregates containing high silt percentage and even contaminated can be pumped easily by using Hind Pump Aid without exerting excessive pressure on the concrete pump.
ADVANTAGES
- 1. Hardened concrete properties is not affected on using Hind Pump Aid.
- 2. Use of Hind Pump Aid increases the plasticity, internal cohesion and flexibility of fresh concrete to a greater extent. It improves the workability and the pumping characteristics of concrete mixes.
- 3. Hind Pump Aid is chloride free and it use in concrete does not lead to corrosion of reinforcements and can be used for reinforced and pre-stressed concrete structures without any restriction.
APPLICATION
Hind Pump Aid is to be added directly to gauging water at the ready mix plant. The optimum effect of Hind Pump Aid is achieved after 90 seconds from the time of mixing of water. Hind Pump Aid can be used alongwith Hind Plast Super SCA Superplasticers to produce high quality concrete. It is always recommended to perform trial mixes when used with other admixtures and for fixation of dosage.. Adding Hind Pump Aid increases the viscosity of concrete mixes. The power of the mixing motor to be increased when it is compared with the normal concrete with same water content.
PROPERTIES
| Aspect | Light Green Liquid |
| Specific Gravity | 1.01 + 0.02 |
| Chloride content | Nil |
| pH | 7.0 to 10.0 |
DOSAGE
The recommended dosage suggested ranges from 200 ml to 400 ml/ 100 Kg of Cement to increase cohesion of difficult concrete mixes.
500 ml to 900 ml/ 100 Kg of Cement to reduces the concrete pump pressure for low cement or low fine content.
Normally the dosage varies from 1-2 Litre per cubic meter of concrete.
SHELF LIFE
Best before 6 months from the date of manufacture. Should be stored in a cool and dry place away from direct sunlight at temperature ranging between 20 C (Min.) and 500 C (Max.)
PACKING
20 and 200 Litre Container or as required.
HANDLING PRECAUTION
Hind Pump Aid is non-toxic and ingestion is to be avoided. Any contact with the skin must be washed with water. If contact with eyes occurs, wash well immediately with water and seek medical advice.
Even though HINDCON CHEMICALS LTD. (Formerly known as Hind Silicates Pvt Ltd.) was formed in 2000, its chemical production roots date back to as early as 1947
Navigation
Get in Touch
- ‘VASHUDHA’
- 62 B, BRAUNFELD ROW,
- KOLKATA-700 027
- 033 2449 0839
- contactus@hindcon.com