Hind Sealant Primer is used in conjunction with Hind Sealant PS. It is recommended for the surface namely concrete, brickwork, asbestos, cement, gypsum, board, stone, glass, timber, rigid PVC, anodized aluminum, ceramics etc. Primer is not required for Epoxy and Polyester surfaces.
Prime only on two sides of the property prepared joint surface with Hind Sealant Primer by brush and allow it to cure for minimum 20 minutes. Apply two coats of Hind Sealant Primer at an interval of 30 minutes. After priming is over Hind Sealant PS should be filled in the joints.
For porous and nonporous surface coverage of 50 – 55 ft2 / Ltr /coat is achieved.
12 months from the date of manufacture in unopened condition. Keep in cool and dry place.
200 / 250 ml. in containers
Hind Sealant Primer is non-toxic and ingestion to be avoided. Any splashes to the skin must be washed with water. If contact with eyes occurs, wash well immediately with water and seek medical advice.