FEATURES AND BENIFITS
Surface must be dry, clean and free from grease, wax, oil and any loose or other material, which may inhibit adhesion of putty. Remove loose rust and scale with a wire brush prior to application. Best results are obtained when the surface is dry.
Apply directly from the cartridge or use a putty knife. For large hole or cracks, apply a layer of Waterproofing Putty around the area to be repaired, then embed a piece of fiberglass reinforced matting into the first layer, then apply second layer.
Depending on application and porosity of surface, you will need 1 Kg of Hind Sealant BP to fill a joint 25mm x 25mm x 1300mm approximately.
Use mineral turps to clean up excess Waterproofing Putty and tools.
12 months in an unopened container, stored in a cool dry place
|Aspect||Black Thick Paste|
|Flash Point||> 45 0 C|
|Specific Gravity||1.3 Kg/Ltr. approx.|
10 Kg & 20 Kg. containers
Hind Sealant BP is non-toxic but ingestion is to avoided. Any splashes to the skin must be washed with solvent or water. If contact with eyes occurs, wash well immediately with water and seek medical advice.