Hind Polycoat


pdf

Category: .
Description

 

USES 

Hind Polycoat is recommended to be used on concrete floor which needs to be stain resistant, chemical resistant. It is ideal for concrete courtyards in Real Estate Project, Industrial floors in Car  manufacturing  factory, Pharmaceutical factory, Food product  manufacturing unit, Beverage/Bottling Plants, Dam Power House floors etc. etc. It conforms to ASTM D 870 for blistering, adhesion and discoloration. Passes ASTM D 2795 standards for gasoline and motor oil resistance. It also conforms to abrasion resistance standard as per ASTM D 4060.

ADVANTAGES

♠   Highly durable, adhesion and low maintenance cost.

♠   Excellent bonding with the substrate  that does not peel, flake or delaminate.

♠   Creates a stronger, more impenetrable and better looking finish that is dust proof, resistant to staining and      deterioration.

♠   Produces a tough trafficable surface for high abuse areas that are subject to light trafficking in 6-8 hours.

♠   Reduces maintenance, cleaning costs and costly repairs. Only damp mop is required.

♠   Environmental  friendly, Low VOC content, Non toxic, Non-flammable, Easy water cleanup.

♠   Maximum performance may take up to 3 days to develop, depending on temperature and humidity. Do not       allow standing water to be left on the surface after coating is done for 48 hours.

PROPERTIES

Aspect White/Coloured Aqueous Solution (as per requirement)
Specific Gravity at 270 C 1.01     0.05
pH 7.0    1.0
Chloride Content Nil
VOC Content Less than 50 gms/Ltr.
Coverage Sponge Brush application   275 ~ 325 m2 / 20Kg ( 0.07 Kg/m)
Spray application                300 ~ 350 m2 / 20Kg  ( 0.06 Kg/m)

Note: Coverage may vary depending on the porosity of the surface

APPLICATION PROCEDURES & INSTRUCTIONS

Substrate Preparation: Cement Concrete/Cementitious products

For long term placement create a rough surface profile using diamond grind about #180 for Clean and neutralization. The surface must be dry, free of surface containments and in sound condition. Grease and oil should be removed as per ASTM D 4258-83 and release agents should be removed as per ASTM D 425-88.

Refer to SPC-SP13/NACE No. 6 mechanical or chemical surface preparation methods for preparing concrete to suitable cleanliness for intended service. Surface preparation methods should impart sufficient surface profile for mechanical adhesion to occur. Ensure surface is thoroughly rinsed and dry prior to preparation and application. Uneven concrete substrate, scratches and cracks are to be repaired with polymer mortar to achieve the smoothness. Mask Areas that do not receive the coating topcoat finish and surface hardener is to be protected from over spray.

Important Instructions:

♠   Complete mixing is essential for good product performance. Mix well preferably with a slow speed drill fitted with a stirrer and after  proper mixing the coating to be applied immediately.

♠   Sponge Brush application or Spray application.

STEPS FOR APPLICATION

At first concrete is to be poured mixed with surface hardener and allowed to cure for 28 days to achieve the targeted compressive strength.  Secondly application of Hind Polycoat  top to be done by rake attached sponge brush. More than 2-3 hours curing under 200 C make the surface ready for next coating stage. In case the application is done in high moisture environment ventilation must be provided to dry and curing of the coating. The second coat of Hind Polycoat to be applied by rake attached sponge brush and the consistency of the coated color to be ensured as like the first coat.

MAINTENANCE

Routine sweeping, mopping, washing and mechanical scrubbing of floor with water and neutral pH cleaners (if necessary) are recommended. Water only is sufficient for most environments.

Note: Do not use cleaners that are acidic or that have citrus(de-limonene) or Butyl compounds. Although Hind Polycoat, coating is chemically resistant and helps reduce staining, its application in specific chemical environments and some acidic concentrates, may etch the surface causing a residual stain. If unsure check with a conversant concrete technical representative. Regular maintenance and cleaning will help prolong surface shine. Wipe up any chemical spills as soon as possible. Always test adhesion and performance for suitability and desired results before application.

SHELF LIFE 

6 months from the date of manufacture if kept in unopened factory sealed container  and  stored below 30° C.

PACKING

In  20 Kg HDPE Container. Available in  White, Red, Blue, Light Grey, Yellow and Green colour shades.

HANDLING PRECAUTION 

Hind Polycoat is non-toxic. Use hand gloves and goggles while applying the same. Avoid ingestion and prolonged skin contact. If contact with eyes occur wash immediately with clean water and seek medical advice.

Print Friendly
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Hind Polycoat”

Your email address will not be published. Required fields are marked *