Hind Plast Super(TM) – Accelerating Cement Admixture conforming to IS:9103 & ASTM C 494 Type C
To accelerate the setting time and early strength gain of cement concrete and mortar mixes without introduction of chloride ion (which is harmful for reinforcement causing corrosion/ rusting). Its water reducing character can be gainfully utilized for both early as well as ultimate strength. Hind Plast Super(TM) A conforms to IS: 9103:1999 (Reaffirmed 2004) Edition 2.2 (2007-08), ASTM C 494 Type C & Type F and BS 5075 Part I and II
The recommended dosage for standard mix concrete ranges from 0.2 to 1% by weight of cement in tropical temperature, higher than 25°C. For low temperature concreting (5°C to 25°C) the dosage ranges from 0.7 to 2% by weight of cement. Admixture is to be added directly into the mixer. For very high early strength, steam curing/ and increase of dosage is recommended, depending on site requirements. The optimum dosage is best determined by site trials with actual concrete mix.
|Aspect||Light orange/Pale brown Liquid|
|Specific Gravity||1.02 ± 0.04 at 27º C|
|Chloride Content||Nil as per BS: 5075|
|Compatibility||All types cements. Not suitable for high Alumina cement (cement fondue)|
|Long term effect||Accelerated corrosion testing shows that the rebars remain protected even at five times the normal dose level of Hind Plast Super(TM) A|
12 months from the date of manufacture in unopened condition. Should be stored in a cool dry place away from direct sunlight.
250 kg. in HDPE Container or as required.
Hind Plast Super(TM) A is non-toxic and ingestion is to be avoided. Any splashes to the skin must be washed with water. If contact with eyes occurs, wash well immediately with water and seek medical advice.