Hind Plast Super(TM) 160



Hind Plast Super(TM)160 – Superplasticizer Modified Polycarboxylate Ether based Low Range Water Reducer IS:9103 & ASTNC 494 Type F


Hind Plast Super(TM)160 is recommended for use in precast concrete, piling, floor slabs, foundation and slender components with packed reinforcement, columns, beams, ceiling and cast -in-situ works.


  • Improves very high workability to concrete mixes without addition of extra water.
  • Improves very high workability to concrete using crusher sand.
  • Improves the retention of high workability with time without excessive retardation of set.
  • Reduces permeability.
  • Produces flowable concrete.
  • Extends initial setting time without affecting the final setting time.
  • Water reduction up to 30%. Higher percentage of water reduction can be achieved depending on Mix Design.
  • Significant increase in ultimate strength.
  • No shrinkage effect.
  • It is applicable in severe atmospheric and saline conditions.


Use Hind Plast Super(TM) 160 @ 0.2 to 2% by weight of cement. It is advisable to carry out trial mixes to establish the exact dosage rate required. It is compatible with all types of cement.


Aspect Light Orange Liquid
Specific gravity Ranges from 1.02 to 1.08 at 27º C
Chloride content 0.2 % (Max)
pH > 6


12 months from the date of manufacture in unopened condition. Should be stored in a cool and dry place away from direct sunlight.


225 Kg. HDPE Containers or as required.


Hind Plast Super(TM)160 is non-toxic and ingestion is to be avoided. Any splashes to the skin must be washed with water. If contact with eyes occurs, wash well immediately with water and seek medical advice. Overdosing of the material may cause delay in setting of the concrete.

Print Friendly
Reviews (0)


There are no reviews yet.

Be the first to review “Hind Plast Super(TM) 160”

Your email address will not be published. Required fields are marked *