Hind Mould Release WT


pdf

Category: .
Description

Water Based Shutter Release Agent

USES

  • To Provide quick, clean and easy stripping of moulds or form work.
  • To obtain clean and smooth concrete surface.
  • To protect steel and wooden form work.

ADVANTAGES

  • Requires only water for use.
  • Minimum cleaning of shutters before re-use.
  • Extended life of form work.
  • Can be used on all types of form work.
  • Improved finish: stain and air free fair faced concrete.
  • Non corrosive to steel.
  • Dirt-free concrete surface.

APPLICATION 

Apply one coat only by brush, roller or spray on the clean surface. Hind Mould Release WT after application should be allowed to dry before concreting takes place.

PROPERTIES 

Aspect Light brown liquid
Coverage(After dilution) 30 to 40 Sq. mtr /Litre (Wood)
Dilution Rate- Hind Mould Release WT : Water = 1:6 40 to 50Sq. mtr /Litre (Steel or plastic)

 SHELF LIFE 

12 months from the date of manufacture in unopened condition. Container should be protected from sunlight and naked flame

PACKING 

100, 200 Litre, HDPE container or as required.

HANDLING PRECAUTIONS

Hind Mould Release WT is non-toxic and ingestion to be avoided. Any splashes to the skin must be washed with water. If contact with eyes occurs, wash well immediately with water and seek medical advice.

Print Friendly
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Hind Mould Release WT”

Your email address will not be published. Required fields are marked *