Hind Foamex


Category: .

Foaming agent for concrete and mortar


Hind Foamex is recommended for use in structures that is required to be thermally insulated and protected against the ingress of moisture, like Roof / Terrace, Basements, Masonry AC Ducts, Cold Storages, Auditorium, Hospital, Industrial Factory Shades etc.



  • Provides full proof thermal insulation, saving energy.
  • Low permeability makes mortar or concrete waterproof.
  • Imparts chemical resistance to substrate.
  • Reduces or prevents salt penetration into concrete
  • Due to light weight does not add extra load to roof structure.
  • It has a good mechanical stability & acts as a excellent shock absorber.


To the freshly prepared cement Slurry maintaining W/C ratio 0.6, Hind Foamex is added and mixed with a high speed mixer to generate foam concrete. To get the desired density of the foam concrete, light weight additives like vermiculite or perlite may be used. It also reduces the cement consumption for making cement slurry. It is recommended to mix Hind Foamex with water used for making cement slurry to achieve best results. Normally curing is to be carried on for 7 (seven) days. Foam concrete blocks can be used for non-load bearing partition walls in multi storied buildings as per required dimensions. To minimize the water absorption of the foam concrete, the surface may be coated/sprayed with Hind Coat Repel, silicon based water repellent coating. To achieve full proof waterproofing of roof, Hind Crete Plus WPM admixed with cement in the ratio of 1:2 in two coats to be applied over the roof surface, prior to foam concreting.


Thermal Insulation/Fire Protection 250-550 Kg/m3
Void Filling 600-800 Kg/m3
Production of blocks for use in non-load bearing partition walls 800-900 Kg/m3
Prefabricated /Cast in place walls both load and non load bearing 1100-1400 Kg/m3
Slabs & higher strength loading bearing building elements 1600-1800 Kg/m3


  Aspect Pale Orange Liquid
  Specific Gravity at 27ºC 1.04  ±  0.05
  pH 11  ±  2
Solubility Miscible with water in all porportions
Chloride 0.2%  Max  (considered to be Nil)
Dosage of Foaming Agent(Normal Dry Density 750 Kg/m3 ) 1.25 to 1.60 Kg  diluted with 25-40 parts water


12 months from the date of manufacture in unopened condition. Should be stored in a cool and dry place away from direct sunlight.


20 Kg & 250 Kg Barrel.


Hind Foamex  is non-toxic and prolonged skin contact should to be avoided. In case of contact with eyes occurs wash with plenty of clean water and seek medical advice. Cleaning of tools is to be done with water.

Print Friendly
Reviews (0)


There are no reviews yet.

Be the first to review “Hind Foamex”

Your email address will not be published. Required fields are marked *