ADHESIVES FOR USE WITH CERAMIC TILES AND MOSAICS
Hind Fix TA is ready mix cement based excellent tile adhesive bearing IS Certification Mark, IS: 15477-2004, Type 1. It is also certified as a green product by Indian Green Building Council (IGBC).
For the permanent fixing of ceramic and mosaic tiles on walls and floors.
All surfaces should be sound, clean and free from any contamination like grease, oil, loose particles etc. before application, the surface and tiles should be pre wetted properly. Hind Fix TA is to be mixed with water in the ratio of 1: 0.2 parts by weight and stir till a smooth paste is obtained. Allow the paste to stand for 4 to 5 minutes and stir again. Spread the paste on the surface to a uniform thickness of 3 to 4 mm. With a notched trowel to remove any trapped air, place the tiles firmly into position by twisting action. Excess adhesive is to be removed by using damp cloth. Powder should be added to water and not vice versa.
5 M2/20 Kg bag at 3mm mortar thickness.
Mix 1 Kg of Hind Fix-TA with 200 ml of water to get a trowel able consistency for fixing tiles. Water can be reduced or increased slightly to achieve desired consistency.
|Mixed Density||1.65 to 1.75 Kg. / litre.|
|Powder: Water Ratio||1: 0.2|
|Volatile Organic Content (VOC)||11.22 gm/Lit|
12 months in unopened condition. The material should be stored in a dry place in the temperature range 50C to 450 C .
25 Kg. in HDPE bags or as required.
Hind Fix TA is non-toxic and ingestion is to be avoided. If contact with eyes occur, wash well immediately with water and seek medical advice.