Category: .



Hind Fix TA (L) is a modified polymer based highly concentrated, waterproof liquid tile fixing adhesive used in conjunction with white/grey cement for both interior and exterior filling works.  It enhances the compressive and flexural strengths with the dimensional stability and also makes the tile joints fully impermeable to water and resists it from flaking and crking.


For the permanent fixing of all sizes and types of ceramic tiles for domestic flooring in bathrooms, roof, terraces, kitchen, water tanks, staircases and laundries. It can also be used to fixed glazed surfaces, vertical claddings and terrazzo tiles.

For Industrial flooring it can be used in large exhibition halls , hotels, shopping malls, Pharmaceutical factory, shops , school & colleges, swimming pools ,warehouses, bridges, dam, canals, laboratories, basements, tunnels, pavements , car parking space, dado areas, footpath and subways etc.


  • Easy to use for fixing vertically and horizontally located tiles.
  • Strong bonding with concrete substrates.
  • Excellent water proofing characteristics.
  • Self-curing, shrinkage proof and non-sagging.
  • UV stable and develops good workable strength with 24 hours.
  • Safe and eco-friendly. Anti fungal & anti-bacterial
  • Soaking of tiles is not required which improves the mechanical properties of finished floors.
  • Non- inflammable and cannot be charged electrostatically.


Surface/Substrate Preparation

All surface/substrates must be fully cured for 28 days, tough and solid, structurally sound, crack less, free from oil, grease, wax and laitance and should be completely dry. Adequate curing of the cementitious substrates should be done during the hot season to avoid shrinkage after the ceramic tiles are installed. Surface exposed to sunlight and hot is to be cooled by spraying water before installation of tiles.


Mix  50Kg white/grey cement as per requirement, 500 gms Hind Fix TA (L) and 20 Litres of clean water and  keep stirring for 5-6 minutes, to obtain a smooth and lump free paste. Now the material is ready for application. For proper adhesion a thin layer of 4mm-5mm thickness is to be applied on the back side of the tiles ensuring recommended coverage  and placed over the  substrate by the flat edge of the notched trowel. It has to be ensured that there is no air entrapped while application of the paste. Tiles can be readjusted upto 40 minutes. Use of mechanical clamps are very essential for heavy tiles fixing on vertical surface.

Fixing of tiles

Tiles are not required to be made wet before fixing.  Tiles to be fixed under adequate pressure in order to get an economical coverage of the adhesive.


3-4 Kg/Sq. Mtr. for 3mm thickness.


Aspect Bluish Pasty Liquid
Base Modified Polymers
Mix Ratio 1: 100:40

(1 gm Hind Fix TA (L) : 100 gms Cement : 40 ml water)

pH 8-9
Application Temperature Ranging  between + 250 C to + 370 C
Open Time > 40 minutes after mixing with cement at 300 C
Curing Time Self curing 7 days at 300 C
Trafficable Time (Foot traffic) After 24 hours
Tension Adhesion Strength (After 14 days) Cement: 48.2N/mm/ Cement + Hind Fix TA(L): 55N/ mm2


12 months in unopened condition. The material should be stored under a shed and in dry condition away from direct sunlight.


100gm,500gm,1Kg, 5 Kg, 10 Kg, 10 Kg & 20 Kg Plastic container.


Hind Fix TA (L) is non-toxic and ingestion is to be avoided. If contact with eyes occurs, wash well immediately with water and seek medical advice.




Print Friendly
Reviews (0)


There are no reviews yet.

Be the first to review “Hind-Fix-TA-L”

Your email address will not be published. Required fields are marked *