Hind Fiber Glass


pdf

Category: .
Description

 

USES

Hind Fiber Glass when used as reinforcement for protective and waterproofing coating it provides high strength and is impact resistance. It is used for reinforcing cement, stone, epoxies, bitumen, gypsum, wall material, roofing etc.

ADVANTAGES

  • Eliminates surface cracking of protective and waterproofing coatings.
  • Water Resistant & Alkali Resistant.
  • Soft and flexible for easy application.
  • Resistant to ageing.
  • Usable on a wide range of surfaces.

APPLICATION

All surfaces should be sound, clean and free from any contamination like grease, oil, loose particles etc. After the base coat is applied Hind Fiber Glass is to be laid and embedded properly, when the coating is still green. It is to be ensured that there are no wrinkles, and the fabric is continuous at all corners and properly lapped and butted lapping and before application, the surface and tiles should be pre wetted properly. The base coat should have minimum thickness so that the fabric is uniformly embedded over the entire surface.

PROPERTIES

Weight 45 gram per M2
Mesh Size 2.5mm X 2.5mm
Width 1000 mm

PACKING

Available in 100/50 Meter Roll

HANDLING PRECAUTION

Hind Fiber Glass is non-toxic, suitable for all surfaces even in contact with potable water.

Print Friendly
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Hind Fiber Glass”

Your email address will not be published. Required fields are marked *