Hind ERS 216(UV)




Hind ERS 216 (UV) is extensively used as grout and sealant in Pharmaceuticals, Printing Industries, Food Processing Plants, Workshops, Tea Blending Plants, stone work joints, Chemical resistant linings to tanks and reservoirs etc.


  • Excellent chemical resistance.
  • Completely dust proof and thus hygienic.
  • Durable and hardwearing and of nil maintenance cost.
  • Excellent adhesion and water proofing property.
  • Attractive and available in wide color  range.


Surface Preparation 

Concrete Surface: The surface of application has to be sound and made free from all dust, dirt, loose & greasy materials and the moisture content of the surface has to be checked. The moisture content can be checked either by a Hygrometer or by an air tight polythene sheet to ensure that no moisture is accumulated in 24 hours for using as grout the grooves should be cut uniformly by a machine tool, dust should be completely removed by suitable method and properly mixed Hind ERS 216 (UV) should be gently poured to ensure free flow of the material to fill the groove.


Hind ERS 216 (UV) is  mixed in small batches taking 2 parts component ‘A’, 1 part component ‘B’ , 6 parts of component ‘C’ and 0.50 part of component ‘D’ taking their weights with a weighing machine. Pre weighted Component ‘A’ has to be poured in a mixing pot first and then component ‘B’, ‘C’ and ‘D’ are to be poured simultaneously and the mix is to be stirred very slowly. When the mix is uniform the low viscous liquid has to be applied/poured on the prepared surface by tooling gently.


Aspect Comp ‘A’- Clear Pale yellow liquidComp ‘B’- Water white liquid

Comp ‘C’- White powder

Comp ‘D’- Color Paste.

Density 1850 to 1900 kg per cum.
Mixing Ratio 2parts Comp-A: 1 part Comp-B : 6  parts Comp-C : 0.50 part Comp-D
Bonding Strength 20-25 Kg/cm2 in 7 days.
Compressive strength 350 Kg /cm2  in 24 hours
Chemical Resistance Is not affected by a wide range of acids, alkalis, salts & oils.
Pot life 30 mins at 270 C if not continuously stirred.


All tools and equipment should be cleaned with Xylene, Toluene or suitable solvent.


Depends upon the thickness of mortar or size of the groove to be filled


24 months from the date of manufacture if kept unopened and temperature around 30°C.


4.75 Kg. & 9.5 Kg. Kit


While working with Hind ERS 216(UV), the workmen should wear gloves and safety shoes, those who are very sensitive in handling epoxy products should also wear safety glasses and clothes.

Print Friendly
Reviews (0)


There are no reviews yet.

Be the first to review “Hind ERS 216(UV)”

Your email address will not be published. Required fields are marked *