Hind ERS 212




  • Free flowing and non-shrink system.
  • Resistance to acids and alkalis.
  • Moisture insensitive
  • Useful and helps rapid installation process with high strength.
  • Very useful in sealing wider cracks


Component A – 2 parts by weight: Component B -1 parts by weight: Component C- 2 parts by weight.


Preparation of Surface

The area to be treated should be properly cleaned by wire brush. Injection ports/nozzles are fixed at a regular spacing. The ports/nozzles to be sealed on the surface to prevent the grout from oozing out at the time of injection operation. It can be directly poured into wider cracks to fill it by gravity.


Component-B Polyamide Hardener and Component –A Resin are mixed at first, then Component C Special Aggregate is slowly mixed well, so as not to entrap air into the product. Mixing is done for 2-3 minutes using a drill and paddle (maximum 200-300 R.P.M.).Only required quantity of material to be mixed for immediate use. The mixed material should be kept undisturbed for 2-3 minutes, so that if any entrapped air is there it escapes from the mix.


The grout mixture is pumped through the ports/nozzles fixed by means of positive displacement pump till there is refusal from the nozzle or the mixture comes out of the adjacent nozzle.


Cleaning: Clean all tools & equipment immediately after use with, Xylene, Toluene or suitable solvent.


Aspect Comp.A-Liquid, Comp.B -Liquid, Comp.C- Powder
Colour Off white (Mixed material)
Density 1350 –1400 Kg/m3  (Mixed material)
Mix Ratio Comp.A : Comp.B : Comp C = 2:1:2 by weight
Working Time 40-45 minutes at 270 C 20 C
Compressive Strength Min 30N /mm2  2N/mm2   in 24 hours at 270 C 20 C

70  5N /mm2 in 7 days at 270 C 20 C

Bond Strength 1.5-2N /mm2 in 7 days at 270 C 20 C
Tensile Strength 14-17.5 N/mm2 in 7 days at 270 C 20 C
Flexural Strength 25-35 N/mm2 in 7 days at 270 C 20 C
Chemical Resistance Is not affected by wide range of chemicals, oils etc.
Shrinkage Non-shrink


 12 months if it is in unopened condition. Should be stored in a cool dry place away from direct sunlight.


5 Kg Kit or as required.


Hind ERS 212 is non-toxic but ingestion is to be avoided. Any splashes to the skin must be washed with water. If contact with eyes occurs, wash well immediately with water and seek medical advice.

Print Friendly
Reviews (0)


There are no reviews yet.

Be the first to review “Hind ERS 212”

Your email address will not be published. Required fields are marked *