Hind Emetop RTU


Category: .



Hind Emetop RTU when trowel led into the surface of concrete floors forms a toughened hard-wearing surface suitable for industrial use. It is recommended for factory floors, warehouse, hangers and car parks that are subjected to heavy traffic.


  • Provides build in wear resistance and produces high abrasion resistant floor surface.
  • Impact resistance twice that of plain concrete.
  • Three times greater surface density than plain concrete which increases resistance to penetration by oil, grease, hydraulic fluids, ethylene, glycol and many industrial chemicals.
  • May be used for open and continuously wet areas.
  • Non-rusting and easy maintenance.
  • Fast construction with minimum site costs for materials handling and non-bonding problems.


Hind Emetop RTU should be broadcast in two equal stages evenly over the surface of freshly laid concrete as soon as the surface water has evaporated. Immediately after each stage of broadcasting of Hind Emetop RTU the first trowelling should be carried out, either by hand or by means of a power float. When the surface has sufficiently stiffened a second trowelling should be given to close any pores and remove any undulation in the surface. This is followed by a final hand trowelling to remove any disc marks. The floor must be thoroughly cured.


This varies from 3-7 Kg per Sq. Mtr. depending on the type of floor as follows:

Moderate Duty

3 Kg/m2

Medium Duty

5 Kg/m2 .

Heavy Duty

7 Kg/m2 .


Aspect Greyish Granular Powder.
Water Absorption 1-2%.
Improvement of Abrasion Resistance/wear Resistance 215 % – 320 % over controlled concrete (Minimum Grade of M-20). It will be tested as per IS-1237, 1980, with the sample specimen of Mortar Cake (1:2) of size 7.06 cm x 7.06 cm. x max. 35 mm. thick. It can be represented either in terms of Loss of thickness or in terms of % Improvement of /abrasion Resistance/wear Resistance with respect to the minimum loss of thickness of the sample with floor hardener.

Compressive Strength


50-75 N/ mm2. Test as per IS-516, 1959 : applicable with M-30 to M-45 grade of concrete the dose of Hind Emetop NM will be as per the type of floor. In general Doses varies from 12-28 kg./


Cum or 3-7 kg. / Sqm. It must be sprayed over the green concrete immediately after the evaporation of bleeding water.


6 months from the date of manufacture. Should be kept in a dry and covered place away from moisture.


40 Kg in  HDPE Bag.


Hind Emetop RTU is non-toxic and ingestion is to be avoided. If contact with eyes occurs, wash well immediately with water and seek medical advice.

Print Friendly
Reviews (0)


There are no reviews yet.

Be the first to review “Hind Emetop RTU”

Your email address will not be published. Required fields are marked *