Hind Cure WP is sprayed or brushed into newly laid concrete surfaces to form a thin film barrier against premature water loss, without hindrance to the normal curing phenomenon due to adequate hydration, water held by the concrete matrix and for very slow evaporation of water from below the membrane so that concrete achieves maximum beneficial properties.
Hind Cure WP is very useful in large areas of exposed concrete such as
Hind Cure WP curing membrane is recommended for application to the newly laid concrete once the surface water has disappeared. For large areas of concrete such as concrete Highway. Power driven automatic spray equipment attached to paver machine is employed. The contents are to be stirred well before application as in Paints application.
|Specific Gravity||0.9 ± 0.05 at 27° C|
|Coverage*||5 to 6 Sq. Metre/Litre.|
* Coverage depends on site condition such as wind velocity, temperature, humidity and porosity of the surface.
Hind Cure WP compiles with ASTM C-309-81 type 2, class A, ASTM C 156, ASTM E 97 and BS: 7542 specification in respect of rate of evaporation loss. The weight of water lost per square meter of coated concrete surface in 24 hours is 0.40 kg. against 0.55 kg. (Maximum) stipulated in Ministry of Surface Transport (Most) Govt. of India’s specification.
12 months from the date of manufacture. Container should be protected from direct sunlight.
100, 200 Litre HDPE container or as required.
Hind Cure WP is non-toxic but ingestion is to avoided. Any splashes to the skin must be washed with water. If contact with eyes occurs, wash well immediately with water and seek medical advice.