Hind Cure AL is sprayed or brushed into newly laid concrete surfaces to form a thin barrier against premature water loss. Without hindrance to the normal curing phenomenon due to adequate hydration water held by the concrete matrix underneath and for negligible evaporation of water from below resin membrane the concrete achieves maximum beneficial properties.
Hind Cure AL is very useful in large areas of exposed concrete such as
Hind Cure AL curing compound is recommended for application once the surface water has disappeared. As it is solvent based, the equipment are to be cleared with mineral Solvents, such as white spirit, kerosene oil, etc. soon after completion of job. It is recommended to stir the contents of container before application and to keep the product away from flame and heat under shade. Application can be done by spray or brush. The coverage depends on site condition such as wind velocity, temperature and humidity.
|Aspect||Aluminum Pigmented Liquid|
|Specific Gravity||0.82 ± 0.02 at 27° C|
|Non-volatile solid content||19 ± 2%|
|Coverage||6 to 7 Sq. metre/Litre|
It dries like pigmented lacquer when sprayed/brushed into newly laid concrete surface not containing surface water. The evaporation rate of water from under the membrane film is as low as 0.30 Kg against 0.55 Kg (Maximum) per Sq.Mtr. per 24 hours stipulated in ASTM/BS/MOST (GOVERNMENT OF INDIA) specification.
12 months from the date of manufacture in unopened condition. Container should be protected from sunlight and naked flame
100, 200 Litre. in HDPE container or as required
Hind Cure-AL is non-toxic but ingestion is to avoided. Any splashes to the skin must be washed with water. If contact with eyes occurs, wash well immediately with water and seek medical advice.