Hind Crete Plus WPM


pdf

ACRYLIC POLYMER BASED CEMENTITIOUS COATING FOR WATER PROOFING

Hind Crete Plus WPM is an acrylic polymer based Cementitious coating and when used as recommended, combines with cement and fine sand to from an impermeable coating by blocking the capillaries and pores of the substrate of concrete. It is also UV resistant.

Description

USES

Hind Crete Plus WPM is recommended for use in all structures that required  to be waterproofed and protected against the ingress of moisture, like Roof / Terrace, Basements, Water tanks, Swimming pools, Retaining Walls, Bridge walls, Tunnels, Sewage tanks, Reservoirs, Dams, Dock Gates etc.

ADVANTAGES

  • Excellent adhesion to most building material.
  • Low permeability makes mortar or concrete waterproof.
  • Imparts chemical resistance to substrate.
  • Reduces or prevents salt penetration into concrete
  • Non toxic and can be used in water tank

APPLICATION

Substrate must be sound, clean free from loose particles or laitance and preferably wire brushed. The surface to receive the coating is to be checked first, if there are any cracks. If any cracks exist, it has to be repaired with cement mortar admixed with Hind Crete Plus WPM..  Undulation and depression to be filled and leveled to obtain even surface. The prepared surface must be thoroughly wetted with water and it has to be ensured that there is no standing water on the surface, before application of the coating.

COVERING CAPACITY

Mix Information Slurry Coat Mortar Repair
Hind Crete Plus WPM 1 1 1
Cement 2 2 2
Fine Sand 2 3
Consumption 700 gm/Sq. Mtr. for two coats 600 gm/ Ltr of mortar 460 gm/ Ltr of mortar

PROPERTIES

  Aspect Milky White Liquid
  Specific Gravity at 27ºC 1.02± 0.01
  pH >6
  Coverage 2.0 to 2.5  Sq. Mtr/Kg in double coat, depending on the smoothness and  porosity of the surface

 

 

CURING

Over the coated surface, water is to be sprinkled after 6-10 hrs. Mild curing to be done after 24 hours of application. After 72 hours curing to be done vigorously and finally kept submerged in water for seven days.

Good results can be obtained if curing is carried on for further period of time.

SHELF LIFE

12 months from the date of manufacture in unopened condition. Should be stored in a cool and dry place away from direct sunlight.

PACKING

500 gm, 1, 5, and 20 kg in HDPE container or as required.

HANDLING PRECAUTION

Hind Crete Plus-WPM is non-toxic and prolonged skin contact should to be avoided. In case of contact with eyes occurs wash with plenty of clean water and seek medical advice. Cleaning of tools is to be done with water.

Print Friendly
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Hind Crete Plus WPM”

Your email address will not be published. Required fields are marked *