Corrosion inhibitor paint for concrete – Corrosion inhibitor for Coating
Hind Corroguard- SA functions as a high performance corrosion inhibiting admixture simultaneously affects both anodic and cathodic processes, it contains molecules in which electron density distribution causes the inhibitor to be attracted to both anodic and cathodic sites. By virtue of the moisture within the concrete these molecules migrate towards the steel and get deposited in a monomolecular layer along the steel and re-establish the barrier between the steel and chloride to prevent corrosion.
Hind Corroguard-SA should be applied over thoroughly cleaned concrete surface free from any types of existing paints, oil, or grease.
The optimum dosage of Hind Corroguard-SA to meet specific requirements should always be determined depending on the severity of the corrosion environment and anticipated chloride loading of the structure. Normally we recommend dosage/coverage ranging between 4-5 Sq. Mtr. per Kg per Coat over concrete.
|Aspect||Pale yellow Liquid.|
|Active Ingredients||100% Organic compound|
|Specific Gravity||1.05 – 1.08 at 25°C|
|Viscosity at 25°C||11-12 secs by Ford B4 Cup|
|Effect||No adverse effect on the physical properties of fresh & hardened concrete. It does not entrain air.|
In un-opened condition, protected from direct sunlight and frost at temperatures between 5ºC and 50°C, Shelf Life is 12 months from the date of manufacture. It should be stored away from reducing agents and combustible materials.
225 Kg. Container or as required.
Hind Corroguard-SA is non-toxic and ingestion is to be avoided. Any splashes to the skin must be washed with water. If contact with eyes occurs, wash well immediately with water and seek medical advice.