High Strength Epoxy Bonding Compound Manufacturer in India
Hind Bond EBA is used as a bonding agent between old to old concrete, old to new concrete, metal to concrete, glazed bricks, tiles, steel or other structural materials to old sound concrete. It is also used for joint sealing.
Hind Bond EBA provides a bond of far better strength of concrete itself, and suitable wherever structural bonding of new to existing old concrete is required.
Surface should be cleaned, dry and free from loose particles, oil, grease or other foreign materials. Deep contaminated concrete should be thoroughly cleaned by wire brush. Mix all the pre-weighed Pack-A with the pre-weighed Pack-B and stir thoroughly preferably with a low speed electric drill or paddle mixer for 2-3 minutes.. Apply a thin layer of Hind Bond EBA with brush to the existing surface, working well into the substrate. Place fresh concrete/mortar while it is still ‘tacky’.
In case of using large packs, when the entire mixed quantity cannot be used at a time, contents of Pack A and Pack B is to be mixed in the ratio 2:1 by weight and consumed within 30 minutes.
Conditions of Application/Limitations
Temperature of the Substrate: 250 C (Minimum) / 400 C (Maximum)
Ambient Temperature: 250 C (Minimum) / 400 C (Maximum)
Humidity of the Substrate: On moist surface, the adhesive to be brushed well into the substrate.
Temperature of the material: The material temperature at the time of application should be between 100 C to 400 C.
|Aspect (Mixed)||Greyish white colored fluid|
|Mixing Ratio||Component A: Component B = 2: 1 by weight|
|Pot Life||25-30 minutes at 300C (as per EN ISO 9514)
Pot life starts when Pack A & Pack B are mixed. Pot life is reduced at high temperature and longer at low temperature. To get a longer pot life small portion by weight to be mixed and applied.
|Open Time||45-50 minutes at 300C (as per EN ISO 9514)|
|Full Curing time at Ambient Temperature||7 days|
|Compressive Strength (300 C)||60 N/mm2 in 7 days (as per ASTM C 881)|
|Flexural Strength (300 C)||30-35 N/mm2 in 10 days (as per IS-9162 -79)|
|Tensile Strength (300 C)||20 N/mm2 in 14 days (as per ISO 527)|
|Bond Strength (300 C)||2-3 N/mm2(Substrate–Concrete dry) (as per ASTM C 881)|
Hind Bond EBA will cover at the rate of 0.25-0.50 Kg. per Sq. Mtr. depending upon the surface porosity, texture and working temperature.
18 months from the date of manufacture in unopened condition. Should be stored in a cool and dry place away from direct sunlight.
1.2 Kg, 3 Kg, 6 Kg. & 18 Kg Kits. All packs contain pre-measured quantity components of Pack A & Pack B.
Hind Bond EBA is non-toxic and ingestion is to be avoided. Any splashes to the skin must be washed with organic solvent like Xylene. If contact with eyes occurs, wash well immediately with water and seek medical advice. Rubber hand gloves are to be worn while handling.
While mixing and applying Hind Bond EBA, tools and skin contacts are to be cleaned by organic solvent like Xylene/Toluene/MEK.