India's Leading Construction Chemicals Manufacturer | GST No. 19AAACH8021M1ZE | +91 033 2449 0835 | +91 033 2449 0839

CONCRETE & MORTAR ADMIXTURE

Home/CONCRETE & MORTAR ADMIXTURE
CONCRETE & MORTAR ADMIXTURE 2018-02-22T05:58:42+00:00

CONCRETE & MORTAR ADMIXTURE

Hind Plast AEA pdf1

Category: CONCRETE & MORTAR ADMIXTURE

AIR ENTRAINING AGENT FOR CONCRETE & MORTAR

DESCRIPTION :

Hind Plast AEA is a slight alkaline solution, miscible with water, and having specific gravity of 1.02. It is an air entraining agent based on selected resin, conforming to ASTM-C 260-66T & IS: 9103:1999 (Reaffirmed 2004) Edition 2.2 (2007-08).

USES :

Hind Plast AEA is recommended to be used for well compacted durable concrete, resistant to extreme thermal variation and frost action is required. The area for use include roads, runways paving’s, hardstands, dams, canal lining, open storage areas etc. Hind Plast AEA of great benefit in light weight concrete, where it improves workability and reduces tendency to bleed. It is useful in reducing the density of light weight concrete blocks, so that blocks meet thermal insulation requirements. Hind Plast AEA gives increased durability to dense concrete and because of the entrained air, a reduction in material costs is achieved.

ADVANTAGES :

Hind Plast AEA functions on the interface of the sand and water to produce stable microscopic air bubbles uniformly distributed throughout the concrete. These bubbles serve to reduce both the amount of water absorbed and damage which arises from the formation of ice crystals in the pores of concrete. Apart from its usefulness in providing a much greater resistance to splaying and cracking in freeze/thaw environments Hind Plast AEA improves the properties of fresh concrete. Thus it gives the concrete better cohesion and workability, reduced segregation and bleeding which often occur when utilizing low quality aggregates and harsh mixes.

APPLICATION :

Hind Plast AEA is supplied, ready to use and should be added to mix with gauging water.

RATE OF ADDITION :

The dosage rate varies from 50-100 Gms of Hind Plast AEA per 50 Kg of cement to produce concrete with entrained air of 5% ± 1%. The appropriate dosage rate of Hind Plast AEA will vary depending upon the particular materials and mix design being used. The exact dosage should be determined by site trials. Generally higher the dosage rate, the greater the air entrainment but mixes with low workability require a higher dosage rate to give a specified air content. In addition, concrete having low cement but high sand content will require less Hind Plast-AEA than Cement-rich, low sand concrete. Other factors to be taken into account include aggregate grading, strength requirements, yield and temperature.

PROPERTIES :

1. It does not contain Calcium Chloride or any other Chemicals, harmful for durable concrete.
2. Is Compatible with all type of Portland cement.
3. Chemicals used for formulation of Hind Plast AEA present no fire or health hazards.
4. Hind Plast AEA is formulated from selected raw materials and is manufactured under control conditions to give a consistent product.

SHELF LIFE :

12 months from the date of manufacture. Should be stored in a cool and dry place away from direct sunlight.

PACKING :

200 Kg. HDPE Container.

HANDLING PRECAUTION :

Hind Plast AEA is non-toxic and ingestion is to be avoided. Any splashes to the skin must be washed with water. If contact with eyes occurs, wash well immediately with water and seek medical advice.

Hind Plast AEP pdf1

Category: CONCRETE & MORTAR ADMIXTURE

USES :

Hind Plast AEP is used to produce easily workable and durable concrete for roads, runways and parking areas, dams, and mass concrete structures and for lining concrete.

ADVANTAGES :

Increased frost resistance.

  • 1. Resistant to de-icing salts.
  • 2. Produces flowable concrete.
  • 3. Improved workability and durability.
  • 4. Increased cohesion reducing the risk of segregation.
  • 5. Reduced water content without loss of workability.
  • 6. Unaffected setting time even when overdosed.
  • 7. Helps to absorb and dissipate heat of hydration in mass concreting.

APPLICATION :

The recommended dosage for Hind Plast AEP ranges from 0.05 to 0.15 % by weight of cement. It is advisable to carry out trial mixes to establish the exact dosage rate required. It is compatible with all types of cement.

PROPERTIES :

Aspect Dark Brown liquid
Specific gravity 1.02 0.02 at 27 ° C
Chloride content 0.1 % (Maximum)
pH > 6

SHELF LIFE :

12months from the date of manufacture in unopened condition. Should be stored in a cool and dry place away from direct sunlight.

PACKING :

200 Kg. HDPE Containers or as required.

HANDLING PRECAUTION :

Hind Plast AEP is non-toxic but ingestion is to be avoided. Any splashes to the skin must be washed with water. If contact with eyes occurs, wash well immediately with water and seek medical advice.

Hind Plast IWA pdf1

Category: CONCRETE & MORTAR ADMIXTURE

Waterproofing Compound for Concrete

USES :

For producing good cohesive concrete or mortar with adequate work ability less porosity and convenience of placement, without addition of extra water. Very suitable for the precast concrete/ mortar products, as it gives fair-faced concrete/ mortar with improved ultimate strength.

ADVANTAGES :

  • Improves work ability without addition of extra water.
  • Permeability of concrete/ mortar is greatly improved.
  • Does not affect setting times.
  • Reduces shrinkage, creep and porosity.
  • Provides fair- faced concrete/ mortar.
  • No attack on rebar, as it is chloride free.
  • Concrete/ mortar flow improves, thus suitable for congested reinforcements.

APPLICATION :

The dosage of Hind Plast IWA is 0.2% by weight of cement i.e. 100 gms. Per 50 Kg bag of cement, however more accurate dosage can be obtained by laboratory and site trials by mix designing as per appropriate requirements.

PROPERTIES :

Aspect Dark Brown Liquid
Specific Gravity 1.19 0.02 at 27 º C
pH >  6
Chloride 0.25 % (Max)
Permeability to water as per IS:2645-2003 Much below the limits of the standard
Compatibility With all cements and quick setting compounds.

SHELF LIFE :

18 months from the date of manufacture in unopened condition. Should be stored in a cool dry place away from direct sunlight.

PACKING :

100gms, 500 gms, 1, 2, 5, 20, 120, 250 kg in HDPE container.

HANDLING PRECAUTION :

Hind Plast IWA is non-toxic and ingestion is to be avoided. Any splashes to the skin must be washed with water. In extreme cold weather, if sedimentation occurs, the sealed drums should be rolled over on the ground for mixing. If contact with eyes occurs, wash well immediately with water and seek medical advice.

Hind Plast N pdf1

Category: CONCRETE & MORTAR ADMIXTURE

NORMAL PLASTICIZER CUM WATER REDUCING CONCRETE ADMIXTURE.

DESCRIPTION :

Hind Plast N is a Ligno Sulphonate based normal plasticizer cum water reducer conforming to IS: 9103: 1999 (Reaffirmed 2004) Edition 2.2 (2007-08) and ASTM C 494 Type A.

 USES :

 Hind Plast N is recommended for use in concrete floor slabs, foundation, column, beams, & pavement.

ADVANTAGES :

 Hind Plast N is a low cost water reducer, which can be used to get one or a combination of benefits:

  • As a water reducer: Reduction in W/C ratio increases strength but reduces workability,
  • Hind Plast N maintains the workability and reduces permeability.
  • As a workability aid increased workability can be achieved by using Hind Plast N for a given water cement ratio which will increase the flow characteristic of the concrete leading to easy placement, compaction and finishing.
  • Reduction of cement content: Hind Plast N can be used to reduce cement content to the extent of 8 to10% by maintaining the original strength specified and workability and reducing the water content required for the given mix.

APPLICATION :

 The optimum dose depends on type of mix, grade of concrete, cement content and the desired workability. As a guide Hind Plast N is added with the mixing water prior to its addition to wet aggregate cement mix @ 0.3% to 1.0 % by weight of cement. It is advisable to carry out trial mixes to establish the exact dosage rate required. It is compatible with all types of Portland cement.

 PROPERTIES :

Aspect Dark brown liquid
Specific Gravity 1.17 ± 0.02 at 27 º C
Chloride content 0.20 % (max)
Air Entrainment < 1% additional air is entrained.
pH >  6

SHELF LIFE :

 12 months from the date of manufacture.Should be stored in a cool and dry place away from direct sunlight.

 PACKING :

  250 kg in HDPE container

HANDLING PRECAUTION :

Hind Plast N is non-toxic and ingestion is to be avoided. Any splashes to the skin must be washed with water. If contact with eyes occurs, wash well immediately with water and seek medical advice.

Hind Plast Super (TM) pdf1

Category: CONCRETE & MORTAR ADMIXTURE

SUPERPLASTICISER CUM HIGH RANGE WATER REDUCING ADMIXTURE AND WATERPROOFING   COMPOUND FOR CONCRETE.

DESCRIPTION :

 Hind Plast Super(TM) is a High range water reducer cum slump retainer,  plasticizer cum water proofing admixture specially suitable for concreting for all climates, bearing BIS Certification Mark IS 9103:1999 (Reaffirmed 2004) Edition 2.2 (2007-08)  and also conforms to IS 2645 : 2003 and ASTM C 494 Type G.

USES :

 Hind Plast Super(TM) is recommended for use in floor slabs, foundation and slender components with packed reinforcement, columns, beams and shotcrete.

ADVANTAGES :

  • Improves very high workability to concrete mixes without addition of extra water.
  • Improves the retention of high workability with time without excessive retardation of set.
  • Reduces permeability.
  • Produces flowable concrete.
  • Extends the setting.
  • Water reduction up to 20% . Higher percentage of water reduction can be achieved depending on Mix Design.
  • Significant increase in ultimate strength.
  • No shrinkage effect.

 APPLICATION :

 Use Hind Plast Super(TM) @ 0.2 to 2% by weight of cement. It is advisable to carry out trial mixes to establish the exact dosage rate required. It is compatible with all types of cement.

 PROPERTIES :

Aspect Dark Brown liquid
Specific gravity Ranges from 1.05 to 1.25 at 27º C
Chloride content 0.2 % (Max)
 pH  >  6

SHELF LIFE :

 18 months from the date of manufacture in unopened condition. Should be stored in a cool and dry place away from direct sunlight

PACKING :

225 & 250 Kg. in HDPE container or as required.

HANDLING PRECAUTION:

 Hind Plast Super(TM) is non-toxic and ingestion is to be avoided. Any splashes to the skin must be washed with water. If contact with eyes occurs, wash well immediately with water and seek medical advice.

Hind Plast Super (TM) A pdf1

Category: CONCRETE & MORTAR ADMIXTURE

Hind Plast Super(TM) – Accelerating Cement Admixture conforming to IS:9103 & ASTM C 494 Type C

USES :

To accelerate the setting time and early strength gain of cement concrete and mortar mixes without introduction of chloride ion (which is harmful for reinforcement causing corrosion/ rusting). Its water reducing character can be gainfully utilized for both early as well as ultimate strength. Hind Plast Super(TM) A conforms to IS: 9103:1999 (Reaffirmed 2004) Edition 2.2 (2007-08), ASTM C 494 Type C & Type F and BS 5075 Part I and II

ADVANTAGES :

  • 1. Chloride free, safe in pre stressed and reinforcing concrete.
  • 2. Generates very high early strength in concrete.
  • 3. Its plasticizing action increases work-ability and/or increased strength.
  • 4. Particularly effective in low temperature concreting.

APPLICATION :

The recommended dosage for standard mix concrete ranges from 0.2 to 1% by weight of cement in tropical temperature, higher than 25°C. For low temperature concreting (5°C to 25°C) the dosage ranges from 0.7 to 2% by weight of cement. Admixture is to be added directly into the mixer. For very high early strength, steam curing/ and increase of dosage is recommended, depending on site requirements. The optimum dosage is best determined by site trials with actual concrete mix.

PROPERTIES :

Aspect Light orange/Pale brown Liquid
Specific Gravity 1.02 ± 0.04 at 27º C
pH > 6
Chloride Content Nil as per BS: 5075
Compatibility All types cements. Not suitable for high Alumina cement (cement fondue)
Long term effect Accelerated corrosion testing shows that the rebars remain protected even at five times the normal dose level of Hind Plast Super(TM) A

SHELF LIFE :

12 months from the date of manufacture in unopened condition. Should be stored in a cool dry place away from direct sunlight.

PACKING :

250 kg. in HDPE Container or as required.

HANDLING PRECAUTION :

Hind Plast Super(TM) A is non-toxic and ingestion is to be avoided. Any splashes to the skin must be washed with water. If contact with eyes occurs, wash well immediately with water and seek medical advice.

Hind Plast Super (TM) HR pdf1

Category: CONCRETE & MORTAR ADMIXTURE

Hind Plast Super(TM) HR – Heat Reducing Concrete Admixture

USES :

Hind Plast Super(TM) HR is recommended for use in floor slabs, foundation and slender components with packed reinforcement, column, beams, shotcrete and ceiling and is very effectively used for reducing the concrete temperature upto 100 C over control concrete.

ADVANTAGES :

  • 1. Improves very high workability to concrete mixes without addition of extra water.
  • 2. Improves the retention of high workability with time without excessive retardation of set.
  • 3. Reduces the temperature of concrete upto 100 C
  • 4. Reduces permeability.
  • 5. Produces flowable concrete.
  • 6. Extends the setting.
  • 7. Water reduction up to 25 %.
  • 8. Significant increase in ultimate strength.
  • 9. No shrinkage effect.

APPLICATION :

Use Hind Plast Super(TM) HR, 0.2 to 2% by weight of cement. It is advisable to carry out trial mixes to establish the exact dosage rate required. It is compatible with all types of Portland cement.

PROPERTIES :

Aspect Yellowish liquid
Specific gravity Ranges from 1.05 to 1.25 at 27º C
Chloride content 0.2 % (Max)
pH > 6

SHELF LIFE :

12 months from the date of manufacture. Store in a cool and dry place.

PACKING :

225 kg. in HDPE container or as required.

HANDLING PRECAUTION :

Hind Plast Super(TM) HR is non-toxic and ingestion is to be avoided. Any splashes to the skin must be washed with water. If contact with eyes occurs, wash well immediately with water and seek medical advice.

Hind Plast Super (TM) MMF pdf1

Category: CONCRETE & MORTAR ADMIXTURE

Hind Plast Super(TM) MMF – Melamine based Superplasticizer

USES :

Hind Plast Super(TM) MMF can be used to produce an extremely workable FLOWABLE CONCRETE without loss of strength or to enable large water reduction to be made for the same workability resulting in dense concrete with higher ultimate strength. This product is quite helpful in producing  pumpable concrete, precast concrete, pre-stressed concrete, industrial /commercial flooring  with  floor toppings and  in areas where early shutter stripping are required.

TABLE-1 Test Results for early Shutter Stripping Usage :

Hind Plast Super(TM) MMF :

 Sl.

No.

Test

 Dosage in Ltr/50Kg of Cement

W/C Ratio

 Cement content in Kg/m3  Slump in mm.  Compressive strength in Kg/cm2
1day     3days       7days    28days
1. Control Mix Nil 0.55 400 100 82 140 243 342
2. With Hind Plast Super(TM)  MMF 0.3 0.50 400 115 116 245 340 405

 

NOTE:  The above results are guidelines and as such are suggested in good faith. It is based on test carried out by us in our laboratory using cement, aggregates available locally. Type of cement aggregates from other sources can produce different results. Therefore, it is recommended that site trials are essential to determine optimum suitability for proposed application & dosages.

ADVANTAGES :

Substantial improvement in workability and flow properties without increased water, produces self levelling concrete which can be poured into place around densely located reinforcement and requires little (or no) vibration to achieve optimum compaction. The bond strength of concrete to reinforcement steel is considerably increased.

  • 1. The internal friction and thixotropy of the mix is reduced to a minimum without the risk of segregation, thus making concrete pumping more efficient.
  • 2. Very significant reduction in water minimizes shrinkage cracking thereby producing durable, impervious concrete with a good surface finish. It is suitable for use in all types of concrete above and below ground subjected to water pressure and aggressive atmospheric conditions. Reduction in concrete permeability, protects against water migration and corrosion of reinforcements.
  • 3. For a given concrete mix, keeping the cement consumption and workability constant by huge reduction in the amount of mixing water, substantial increase in strength can be achieved. Alternatively, for the same concrete mix, by keeping the workability and strength constant, a definite cement economy ranging from 15 to 25% can be obtained. Obvious advantages for precast concrete production.

APPLICATION :

Hind Plast Super(TM) MMF is supplied ready for use. For effective dispersion in the mix, measured quantity of Hind Plast Super(TM) MMF should be added into the mix with gauging water. It should not be added to the dry cement.

 PROPERTIES :

Aspect Dark Brown liquid
Chloride content 0.2 % (Max)
Specific gravity 1.20 0.02 at 270 C
 pH >  6
Compatibility Can be used with all types cements including sulphate resistant  cement.

SHELF LIFE :

 12 months from the date of manufacture in unopened condition. Should be stored in a cool and dry place away from direct sunlight.

PACKING :

 250 Kg. in HDPE container or as required.

HANDLING PRECAUTION :

Hind Plast Super(TM) MMF is non-toxic and ingestion is to be avoided. Any splashes to the skin must be washed with water. If contact with eyes occurs, wash well immediately with water and seek medical advice.

Hind Plast Super (TM) P pdf1

Category: CONCRETE & MORTAR ADMIXTURE

Naphthalene( powder) based Superplasticizer Admixture – Hind Plast Super

USES :

Hind Plast Super(TM) P, is recommended for use in floor slabs, foundation and slender components with packed reinforcement, columns, beams and Shotcreting (Dry).

ADVANTAGES :

  • 1. Improves workability to concrete mixes without addition of extra water.
  • 2. Reduces permeability.
  • 3. Water reduction up to 12%.
  • 4. Significant increase in ultimate strength.
  • 5. No shrinkage effect.

APPLICATION :

Use Hind Plast Super(TM) P @ 0.2 to 1.0 % by weight of cement. It is advisable to carry out trial mixes to establish the exact dosage rate required. It is compatible with all types of cement.

PROPERTIES :

Aspect Dark Brown Powder
Bulk Density 655 5 gm/ltr.
pH (10% Soln.) 9.50 0.05
Chloride content 0.2 % (Max)

SHELF LIFE :

12 months from the date of manufacture in unopened condition. Should be stored in a cool and dry place away from direct sunlight

PACKING :

25 Kg. in HDPE Bag.

HANDLING PRECAUTION :

Hind Plast Super(TM) P is non-toxic and ingestion is to be avoided. If contact with eyes occurs, wash well immediately with water and seek medical advice.

Hind Plast Super (TM) PQC pdf1

Category: CONCRETE & MORTAR ADMIXTURE

Hind Plast Super(TM) PQC – Sulphonated Naphthalene Formaldehyde based Admixture

USES :

Hind Plast Super(TM) PQC is recommended for use in floor slabs, foundation and slender components with packed reinforcement and pavement quality concrete for Roads, Bridges Decks, Jetty etc.

ADVANTAGES :

  • 1. Improves very high workability to concrete mixes without addition of extra water.
  • 2. Improves the retention of high workability with time without excessive retardation of set.
  • 3. Reduces permeability.
  • 4. Produces flow-able concrete
  • 5. Water reduction up to 20%.
  • 6. Significant increase in ultimate strength.
  • 7. No Shrinkage effects.

APPLICATION :

 The recommended dosage range is 0.5 to 2% by weight of cement. It is advisable to carry out trial mixes to establish the exact dosage rate required. It is compatible with all types Portland cement. Hind Plast Super(TM) PQC is added to part of the mixing water prior to its addition to wet aggregate cement mix.

PROPERTIES :

Form Dark Brown liquid.
Specific gravity at 270 C 1.19 ±  0.02
Chloride content 0.2 % (Maximum)
Air Entrainment 1 to 2 % additional air is entrained.
pH > 6

SHELF LIFE :

12 months from the date of manufacture in unopened. Should be stored in a cool and dry place away from direct sunlight

PACKING :

250 Kg. HDPE Container or as required.

HANDLING PRECAUTION :

 Hind Plast Super(TM) PQC is non-toxic and ingestion is to be avoided. Any splashes to the skin must be washed with water. If contact with eyes occurs, wash well immediately with water and seek medical advice.

Hind Plast Super (TM) WRA pdf1

Category: CONCRETE & MORTAR ADMIXTURE

Hind Plast Super(TM) WRA – Super Plasticiser cum High Range Water Reducing Concrete Admixture

USES 

Hind Plast Super(TM) WRA is recommended for use in floor slabs, foundation and slender components with packed reinforcement, columns, beams and pavement quality concrete.

ADVANTAGES 

  • 1. Improves very high workability to concrete mixes without addition of extra water.
  • 2. Reduces permeability.
  • 3. Produces flowable concrete.
  • 4. Water reduction up to 15 %.
  • 5. Significant increase in ultimate strength.
  • 6. No shrinkage effects.

 APPLICATION 

The recommended dosage is 0.5 to 2 % by weight of cement. It is advisable to carry out trial mixes to establish the exact dosage rate required. It is compatible with all types of Portland cement. Hind Plast Super(TM) WRA is added to gauging water prior to its addition to wet aggregate cement mix.

PROPERTIES  

Aspect Dark Brown Liquid
Specific gravity Ranges from 1.05 to 1.22 at 27 ° C
Chloride content 0.2 % (Max)
pH > 6

SHELF LIFE 

12 months from the date of manufacture in unopened condition. Should be stored in a cool dry place away from direct sunlight

PACKING 

250 kg. in HDPE Container or as required.

HANDLING PRECAUTION 

Hind Plast Super(TM) WRA is non-toxic but ingestion is to be avoided. Any splashes to the skin must be washed with water. If contact with eyes occurs, wash well immediately with water and seek medical advice.

Hind Plast Super(TM) 160 pdf1

Category: CONCRETE & MORTAR ADMIXTURE

Hind Plast Super(TM)160 – Superplasticizer Modified Polycarboxylate Ether based Low Range Water Reducer IS:9103 & ASTNC 494 Type F

USES

Hind Plast Super(TM)160 is recommended for use in precast concrete, piling, floor slabs, foundation and slender components with packed reinforcement, columns, beams, ceiling and cast -in-situ works.

ADVANTAGE

  • 1. Improves very high workability to concrete mixes without addition of extra water.
  • 2. Improves very high workability to concrete using crusher sand.
  • 3. Improves the retention of high workability with time without excessive retardation of set.
  • 4. Reduces permeability.
  • 5. Produces flowable concrete.
  • 6. Extends initial setting time without affecting the final setting time.
  • 7. Water reduction up to 30%. Higher percentage of water reduction can be achieved depending on Mix Design.
  • 8. Significant increase in ultimate strength.
  • 9. No shrinkage effect.
  • 10. It is applicable in severe atmospheric and saline conditions.

APPLICATION

Use Hind Plast Super(TM) 160 @ 0.2 to 2% by weight of cement. It is advisable to carry out trial mixes to establish the exact dosage rate required. It is compatible with all types of cement.

PROPERTIES

Aspect Light Orange Liquid
Specific gravity Ranges from 1.02 to 1.08 at 27º C
Chloride content 0.2 % (Max)
pH > 6

SHELF LIFE

12 months from the date of manufacture in unopened condition. Should be stored in a cool and dry place away from direct sunlight.

PACKING

225 Kg. HDPE Containers or as required.

HANDLING PRECAUTION

Hind Plast Super(TM)160 is non-toxic and ingestion is to be avoided. Any splashes to the skin must be washed with water. If contact with eyes occurs, wash well immediately with water and seek medical advice. Overdosing of the material may cause delay in setting of the concrete.

Hind Plast Super(TM) HPC pdf1

Category: CONCRETE & MORTAR ADMIXTURE

SUPERPLASTICIZER, HIGH EARLY STRENGTH, HIGH RANGE WATER REDUCING ADMIXTURE FOR CONCRETE & PRECAST CONCRETE

DESCRIPTION

 Hind Plast Super(TM) HPC is a new generation polycarboxylic ether based admixture conforming to IS 9103: 1999 (Amended 2003),  ASTM C 494, Type F & G and IS: 2645:2003 .

 USES

 Hind Plast Super(TM)HPC is recommended for use in concrete of all types especially for concrete with high workability, high early and long term strength requirements with zero segregation and low water Cement (binder) ratio.

ADVANTAGES

  • Improves workability of concrete mixes with low W/C Ratio.
  • To achieve high early strength.
  • Curing time gets reduced, resulting to increased production of concrete.
  • Especially beneficial for quality precast concrete element.
  • Impervious concrete with less shrinkage resulting to early and ultimate Compressive and Flexural strength is achieved in comparison to use of the common traditional Superplasticiser
  • Significant increase in ultimate strength.

APPLICATION

The recommended dosage is 0.3 to 1.5% by weight of cement. It is advisable to carry out trial mixes to establish the exact dosage rate required. It is compatible with all types of cement. Hind Plast Super(TM) HPC is to be added to wet concrete after 70-80% of the mixing water is added. At no time it is recommended that it should be added to dry aggregate and cement.

PROPERTIES 

Aspect Light Orange Liquid
Specific Gravity Ranges from 1.06 to 1.29 + 0.02 at 250 C
Chloride content < 0.2 %
pH >  6

SHELF LIFE

12 months from the date of manufacture in unopened condition. Should be stored in a cool and dry place away from direct sunlight.

 PACKING

225 Kg. HDPE Containers or as required.

HANDLING PRECAUTION

 Hind Plast Super(TM) HPC is non-toxic but ingestion is to be avoided. Any splashes to the skin must be washed If contact with eyes occurs, wash well immediately with water and seek medical advice. Overdosing of the material may cause delay in setting of the concrete.

Hind Plast Super(TM) R pdf1

Category: CONCRETE & MORTAR ADMIXTURE

Hind Plast Super(TM) R – Retarding Concrete Admixture cum Water reducing Admixture

USES

Hind Plast Super(TM) R is used for high range water reduction in concrete, mortar and shotcrete mixes that enables a user to retain workability without compromising strength.

ADVANTAGES

  • An excellent aid for pumping concrete.
  • Keeps concrete in plastic state and workable for long time.
  • Placement for concrete in areas for congested reinforcement becomes easier.
  • High water reduction enables high ultimate strength.
  • Achieves high early strength, enabling faster shipping formwork.
  • Arrests shrinkage & creep.
  • Enables to save cement in concrete.
  • Improves compactness, strength and durability of concrete.

APPLICATION & DOSAGE

A trial should be conducted against control concrete to fix the exact dose to achieve the desired workability, within the given parameters of the mix design. Varying doses between 0.3 % to 2.0 % by weight of cement, should bring in the desired results. For free technical consultancy, suggestions on mix designs, kindly call our Technical Services Division.

GUIDELINES

The table below shows laboratory results of the various applications of Hind Plast Super(TM) R to achieve high workability, cement saving, improved strength, etc. to suit specific requirements.

Typical Performance of Hind Plast Super(TM) R 

Grade of Concrete (M35A20) Cement Content (kg./M3) W/C (Water to Cement ratio) Hind Plast Super-R Dose (%BWOC) Initial Slump (mm) (After 1 hour) Slump (mm) 28 days Strength (N/mm2) Benefit
M-35 404 0.41 25 0 40.28 Normal concrete
M-35 403 0.41 0.5 75 25 46.58 Cement Saving
M-35 403 0.41 0.6 85 50 47.5 High

Strength

M-35 426 0.41 0.5 175 115 46.35 Very High Workablility,Graeter strength.
M-35 425 0.41 0.6 190 155 47.0 Cohesive Economical Workable Concrete

Setting Time Testing for Hind Plast Super(TM) R 

Grade of concrete Hind Plast Super(TM) – R Dose ( % BWOC* ) Curing temp. Initial Set

Hrs.

Final  Set

Hrs.

M-35 Nil ( Control ) 270 C 20 C 8 14
M-35 0.5 – 0.6 270 C 20 C 9 16

*BWOC : By weight of cement.

(Results obtained with PPC 53 grade cement at 30° C and 65% Rh)

 PROPERTIES

Aspect Dark Brown Liquid
 Specific Gravity Ranges from 1.05 to 1.22 at 27° C
 pH  > 6
Chloride Cont 0.2% (max)
 Compatibility With all cements and quicksetting compounds.

 SHELF LIFE

 12 months from the date of manufacture in unopened condition. Should be stored in a cool dry place away from direct sunlight

PACKING

250 kg. in HDPE Container or as required.

HANDLING PRECAUTION

Hind Plast Super(TM) R is non-toxic and ingestion is to be avoided. Any splashes to the skin must be washed with water. If contact with eyes occurs, wash well immediately with water and seek medical advice.

Hind Plast Super(TM) SCA pdf1

Category: CONCRETE & MORTAR ADMIXTURE

      SELF COMPACTING HIGH PERFORMANCE SUPER PLASTICIZER BASED ON POLYCARBOXYLIC TECHNOLOGY

 DESCRIPTION

Hind Plast Super(TM) SCA is a new generation Superplasticizer for concrete based on Polycarboxylic Ether Polymer with long lateral chains. Hind Plast Super(TM) SCA gets the cement to be dispersed to a greater extent and combines the properties to produce self compacting non-shrinkable concrete with high range water reduction and workability retentions. It is also helpful for the production of high performance concrete with high workability.  It conforms to IS: 9103: 1999 (Reaffirmed 2004) Edition 2.2 (2007-08), ASTM C494, Type F & G and IS: 2645: 2003.

 USES

Hind Plast Super(TM) SCA is a high performance Superplasticizer which is suitable for concrete where high early and ultimate strengths are required.  It has been developed for use in

  • 1. Self compacting concrete.
  • 2. Concrete with extreme water reduction with excellent flowability with optimal cohesion.
  • 3. Pumped concrete.
  • 4. Pre-cast concrete.
  • 5. High performance and high strength concrete.
  • 6. Concrete requiring long workability and retention.

ADVANTAGES

  • Strong self compacting behavior.
  • Water reduction up to 40%. Higher percentage of water reduction can be achieved depending on Mix Design.
  • Develop early strength.
  • Increase flexural strength.
  • Reduces permeability.
  • Reduced shrinkage and creep.
  • Increase durability.
  • Reduced rate of carbonation of the concrete.
  • Improved adhesion to reinforcing and stressing steel.

APPLICATION

 The optimum dosage of Hind Plast Super™ SCA ranges from 0.2 to 1.0% by weight of cement. It is advisable to carry out the trial mixes to establish the exact dosage rate required. Hind Plast Super SCA is compatible with all types of cement. Hind Plast Super TM SCA is added to gauging water prior to its addition to wet aggregate cement mix

PROPERTIES

  Aspect Light Brown liquid.
Specific Gravity 1.08   ±  0.02
Chloride content 0.2 % (Max)
pH  >  6

SHELF LIFE

12 months from the date of manufacture in unopened condition. Should be stored in a cool and dry place away from direct sunlight

 PACKING

225 Kg. HDPE Containers or as required.

HANDLING PRECAUTION

Hind Plast Super(TM) SCA is non-toxic and ingestion is to be avoided.  Any splashes to the skin must be washed with water.  If contact with eyes occurs, wash well immediately with water and seek medical advice. Overdosing of the material may cause delay in setting of the concrete.

Hind Plast VMA pdf1

Category: CONCRETE & MORTAR ADMIXTURE

Hind Plast VMA –  Powder based Viscosity Modifying Agent

USES

Hind Plast VMA is recommended for self compacting concrete (SCC), high flow-able concrete, pump-able concrete and concrete with high W/C ratios.

ADVANTAGES 

  • 1. It possess outstanding anti-bleeding & anti-segregation properties.
  • 2. On its addition it does not effect the flow properties of concrete.
  • 3. Low dosage
  • 4. It mixes with concrete rapidly resulting fast action.
  • 5. Compatible with all types of admixture.

 APPLICATION

 Hind Plast VMA should be dissolved to a 1% solution and should be stirred properly before using as a concrete admixture.

PROPERTIES

Aspect White coloured  powder, granule.
Drying Loss (M%) Ranges from 1.05 to 1.25 at 27º C
Chloride content 14.0 (Max)
 pH  6.0 to 9.0

SHELF LIFE

12 months from the date of manufacture in unopened condition. Should be stored in a cool and dry place away from direct sunlight

PACKING

25 Kg. in HDPE Bag or as required.

HANDLING PRECAUTION

Hind Plast VMA is non-toxic and ingestion is to be avoided. Any contact with the skin must be washed with water. If contact with eyes occurs, wash well immediately with water and seek medical advice.

Hind Plast VMA (L) pdf1

Category: CONCRETE & MORTAR ADMIXTURE

Hind Plast VMA (L) – Viscosity Modifying Admixtures for self compacting concrete

USES 

Hind Plast VMA (L) is recommended for self compacting concrete (SCC), high flow-able concrete, pump-able concrete and concrete with high W/C ratios.

ADVANTAGES 

  • 1. It possess outstanding anti-bleeding & anti-segregation properties.
  • 2. On its addition it does not effect the flow properties of concrete.
  • 3. Low dosage
  • 4. It mixes with concrete rapidly resulting fast action.
  • 5. Compatible with all types of admixture.

 APPLICATION

 Hind Plast VMA (L) is to be added to concrete after all ingredients have been batched and thoroughly mixed either it is in the Batching Plant, Laboratory trials or at jobsite. The placement of concrete can be done using the conventional method or by concrete pump. Placement of concrete produced with Hind Plast VMA (L) should be done continuously without any interruption. Hind Plast VMA (L) can also be dispensed during transit of freshly prepared concrete in Transit Mixer and mixing to be carried on for 5 minutes after its addition. The addition of Hind Plast VMA (L) is to be increased proportionately as the water content increases and reduced when the water content is lower.  It is always advised to carry out trial mixes to ascertain the exact dosage to achieve the desired requirements.

PROPERTIES

Aspect Opaque Liquid
Specific Gravity 1.02   0.02
Chloride content Nil
 pH  6.0 to 9.0

DOSAGE 

The recommended dosage suggested ranges from 200 gms to 800 gms by weight of cementitious material.

 SHELF LIFE 

12 months from the date of manufacture in unopened condition. Should be stored in a cool and dry place away from direct sunlight

PACKING

200 Kg. Container or as required.

HANDLING PRECAUTION

Hind Plast VMA (L) is non-toxic and ingestion is to be avoided. Any contact with the skin must be washed with water. If contact with eyes occurs, wash well immediately with water and seek medical advice.

Hind Pump Aid pdf1

Category: CONCRETE & MORTAR ADMIXTURE

 PUMPING ADMIXTURE FOR CONCRETE

DESCRIPTION

 Hind Pump Aid is an unique admixture formulated from Polymer solution to improve the pump-ability of concrete mixes and it also protects concrete pumps and pipeline from excessive wear and damage. It is a  viscosity controlling agent which allows the concrete to pass through the pipeline without any friction.

USES

Hind Pump Aid is used for concrete mixes with low cement content variable fines, poor particle size distribution and consequently low water retention capacity which makes the mix segregate when it is pumped thus creating a very high pump pressure. Aggregates containing high silt percentage and even contaminated can be pumped easily by using Hind Pump Aid without exerting excessive pressure on the concrete pump.

ADVANTAGES

  • 1. Hardened concrete properties is not affected on using Hind Pump Aid.
  • 2. Use of Hind Pump Aid increases the plasticity, internal cohesion and flexibility of fresh concrete to a greater extent. It improves the workability and the pumping characteristics of concrete mixes.
  • 3. Hind Pump Aid is chloride free and it use in concrete does not lead to corrosion of reinforcements and can be used for reinforced and pre-stressed concrete structures without any restriction.

 APPLICATION

 Hind Pump Aid is to be added directly to gauging water at the ready mix plant. The optimum effect of Hind Pump Aid is achieved after 90 seconds from the time of mixing of water. Hind Pump Aid can be used alongwith Hind Plast Super SCA Superplasticers to produce high quality concrete. It is always recommended to perform trial mixes when used with other admixtures and for fixation of dosage.. Adding Hind Pump Aid increases the viscosity of concrete mixes. The power of the mixing motor to be increased when it is compared with the normal concrete with same water content.

PROPERTIES

Aspect Light Green Liquid
Specific Gravity 1.01 +  0.02
Chloride content Nil
 pH  7.0 to 10.0

DOSAGE

The recommended dosage suggested ranges from 200 ml to 400 ml/ 100 Kg of Cement to increase cohesion of difficult concrete mixes.

 500 ml to 900 ml/ 100 Kg of Cement to reduces the concrete pump pressure for low cement or low fine content.

Normally the dosage varies from 1-2 Litre per cubic meter of concrete.

SHELF LIFE

 6 months from the date of manufacture in unopened condition. Should be stored in a cool and dry place away from direct sunlight

PACKING

 20 and 200 Litre Container or as required.

HANDLING PRECAUTION

 Hind Pump Aid is non-toxic and ingestion is to be avoided. Any contact with the skin must be washed with water. If contact with eyes occurs, wash well immediately with water and seek medical advice.